19
ENGLISH
VERY IMPORTANT:
in outdoor installations, do not install the speaker with
the front grille facing upward, as the accumulation of water in the loudspeaker
cones could cause malfunctions.
Keep a distance of at least 30 mm between the speaker and surrounding
objects to permit adequate ventilation.
3.
Using the two hinges
B
(Fig. 1) of the support, orient the speaker in
the desired direction and use the special Allen wrench to tighten the two
nuts.
CONNECTIONS
WARNING:
To prevent the risk of electric shock, do not connect the
speaker with the amplifier switched on.
Before using the speaker, carefully check that all the connections have been
made correctly to make sure there are no accidental short circuits that could
cause electrical sparks. The speaker can be connected to constant voltage
lines at
70 V
or
100 V
. Connections are made using the 6-conductor input
cable that leads from the speaker (Fig. 2).
Fig. 1 -
Wall installation
