RCE EVA Royal 3100, Operating Instructions Manual

Page: 106 / 116

-16-
B
C D
E
A
E
M
A
G
R
N
D. Adjust the width and length of
stitch 013/015 for various weights
of knit and stretch fabrics. E.
For1/2 inch seam allowances,
sew then trim the excess fabric
close to the stitching. Be careful
not to cut thread when cutting the
fabric edge.
When using the all-purpose foot,
place the fabric so that the needle
will fall near the edge of fabric. C.
Use a narrower zigzag width for
thin or fine fabrics.
USING THE GENERAL PURPOSE FOOT
B. Some stitches can sew
overcasting and regular stitches at
the same time. Therefore, it is
convenient to use when sewing easy
to ravel and stretch fabrics.
A. Overcasting stitches (width 7.0-
5.0) are used to prevent fabric
raveling.
Position the fabric against the guide
plate of the overcasting foot so that
the needle falls near the edge of the
fabric.
USING THE OVERCASTING FOOT
Overcasting foot should be used for sewing patterns,
do not change the stitch width below 5,o. It is possible
that the needle could hit the presser foot and break
when sewing other patterns and width.