RCBS 98941, Product Instructions

Page: 17 / 116

13
2. “AB” — These are the settings for the Bluetooth parameters.
“A” governs the Pair/Unpair mode settings:
0 = Unpair mode (default)
1 = Pair mode
“B” controls the Link Password settings:
0 = Link Password disabled (default)
1 = Link Password enabled
Press [GO] to save your A and B parameters.
Unpair mode does not bind your mobile device with the MatchMaster. Since the MatchMaster
is BLE-enabled, it can still connect to the app without going through the traditional Bluetooth
pairing process. Pairing with the device is still offered as an option for extra security.
To operate in
Pair mode , you must ensure that the MatchMaster is ready to pair each time you
use it. The RCBS logo will flash when the MatchMaster is ready to pair. At that point, the app
should be able to connect to your MatchMaster.
Troubleshooting in Pair Mode (iOS/Apple® devices)
If you are having trouble connecting to your MatchMaster device, even after successfully
pairing with it the first time, take the following steps:
1. In your Bluetooth settings, locate the RCBS MatchMaster and press its blue info icon.
2. Choose “Forget This Device”.
3. Now you can follow the pairing steps above to reconnect your app to the MatchMaster.
NOTE: This type of connection problem can occur because iOS does not unbind from Bluetooth-
connected devices by default, even when you disconnect from them. For this reason, the user
has to ‘forget’ the MatchMaster manually to re-establish the connection.
Set Bluetooth Link Password
Press [MODE] key and Use [2] or [8] to choose “bLE”. Then press [CAL] key. The display shows
“PW”. After entering the new password, press [GO] key to save. Default password is 00000.
Clear Bluetooth Link and Wait for Pairing
Press [MODE] key and Use [2] or [8] to choose “bLE”. Then press [ZERO] key instead of [GO] key,
the display shows “CLinK” and then press [GO] key to clear Bluetooth link and wait for pairing. If
it is connected, it will disconnect first.
Step 1 Step 2
Step 3