Other Information
46
Chapter 5
Back Panel
ANT. IN jack
Receives a signal from an antenna or cable system when the VCR is
attached with RF cables.
AUDIO and VIDEO IN jacks
Receives signals from another component (such as
another VCR or camcorder) when connected to these jacks. Use the INPUT button on the
VCR or remote control to select the rear video line input A/V jacks (L1) to record from
these jacks.
AUDIO and VIDEO OUT jacks
Sends signals from the VCR to another component (like
a TV or another VCR) when the other component is connected to these jacks.
CH. 3/4 switch
Determines the channel to which the TV must be tuned in order to see
the VCR’s picture. Not used when connecting the VCR to the TV using A/V cables.
RF OUT jack
Passes the VCR’s signal to a TV using the supplied RF cable.
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT
IN
3 4
