Chapter 2
17
Using On-Screen Menus
4.
Select one of the three choices. If “ALL Channels” is selected, enter the
output channel of the cable box (usually 03 or 04), or if A/V jacks connect
the VCR to the TV, press the INPUT button on the VCR’s remote control.
5.
Once you complete the setup, the VCR confirms that it will now receive all
signals on the designated channel.
VCR Channels List
Your VCR may come with a list of channels preset at the factory. Even
though it may come with such a list, you may want to add or delete
certain channels.
Note
: If you use a cable box to view
all channels
, this step is not necessary.
Auto Channel Searching
Note
: Use Auto Channel Search to place all available channels in memory.
If you ever change cable or antenna signals, you may need to run the Auto
Channel Search feature again.
1.
Press the MENU button to display the
VCR MAIN MENU
.
2.
Press 3 to select
CHANNELS
.
3.
Press 1 to select
AUTO CHANNEL SEARCH
.
4.
Select one of the three options:
Cable TV
searches for cable stations.
Antenna
searches for local broadcast stations.
Detect Automatically
decides which input to use for you.
Notes
: With
Detect Automatically
, a strong cable or antenna signal in
your area may cause channels to be detected inaccurately. If this should
happen, manually select the input signal for the system you have.
The VCR begins scanning for channels available in the area (taking about
one-to-two minutes). When scanning is complete, the VCR tunes to the
lowest channel available. After completing Auto Channel Search, pressing
the remote control’s CHAN + or - buttons should only select active
channels.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4, or Video)
--
Enter 01-13 or INPUT
Press MENU to cancel
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
3>Detect Automatically
0 Cancel
