RCA VRC440, User Manual

Page: 21 / 48

Chapter 2 19
Using On-Screen Menus
Additional Set Up Features in the
FUNCTIONS Menu
Note : The features described on the following pages are all accessed
through the FUNCTIONS menu.
To Access the
FUNCTIONS
menu
1. Press MENU to display the VCR main
MENU
.
2. Press 4 to select
FUNCTIONS
.
You are now ready to select an item from the FUNCTIONS menu to set up.
Auto Play
With Auto Play turned ON (the factory default setting), the VCR automatically
starts playback when you insert a tape with its safety tab removed.
To Access Auto Play:
1. In the FUNCTIONS menu, press 1 repeatedly to switch between Auto Play:
ON
and
OFF
.
• Select
ON
if you want a tape with its safety tab removed to start playing
automatically when inserted.
• Select OFF if you do not want a tape with its safety tab removed to start
playing automatically.
Auto TV/VCR
To control whether the VCR’s TV/VCR setting changes automatically to VCR-
viewing mode when turned on, use the Auto TV/VCR setting.
To Access Auto TV/VCR:
1. In the FUNCTIONS menu, press 2 to repeatedly toggle between Auto TV/
VCR: ON and OFF .
Note : Pressing the TV/VCR button on the remote control will switch
between VCR and TV-viewing modes. When in VCR-viewing mode, VCR is
displayed on the front panel. The VCR indicator turns off when in TV-
viewing mode.
• Select ON to switch VCR-viewing mode on automatically when the
power is turned on. The VCR must be connected to the TV using the
supplied RF coaxial cable.
• Select OFF to remain in the TV-viewing mode when the VCR is initially
turned on. Leaving Auto TV/VCR off is useful if you use A/V cables to
connect the VCR to the TV and you watch the VCR’s picture using the
TV’s video line input. This way, the antenna/cable signal will not be
interrupted by the VCR.
The FUNCTIONS menu
allows changes to be made
to a variety of different VCR
features.
:
FUNCTIONS
1 Auto Play: ON
2 Auto TV/VCR: ON
3 Index Search
4 Go-To Search
MENU Exit
15763820 (VRC440)(E) 05 Menu 5/25/01, 12:52 PM 19