Setting Up the VCR
6. Place channels in the VCR’s memory.
Channels 2 through 13 including line input (
L1/L2
) are in the
VCR’s memory when you first turn it on. Pressing
CHANNEL
up
or down stops on these channels. To get additional channels
available on your antenna or cable system, you must use the
Auto-
Search Channels
feature of the VCR. If you ever change cable or
antenna signals, you may need to
Auto-Search Channels
again.
A
. Press
VCR1
to set remote to control VCR.
B
. Press
MENU•PROG
on the remote to see the
VCR MAIN MENU
on the TV screen. If the menu does not appear on the TV
screen:
•
Make sure TV is tuned to same channel as
CH3 CH4
switch on VCR or the TV’s video input (refer to TV’s
manual).
•
Press
VCR1
and then press
MENU•PROG
.
•
If you use a basic hookup, check
VCR
indicator in display
panel — it should be on. Press
TV•VCR
to turn it on.
•
Check the connections.
C
. Press
4
to select
CHANNEL SETUP
.
D
. Press
1
to begin
Auto-Search Channels.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV will then tune to the lowest
channel found. Pressing
CHANNEL
up or down will select
only the active channels.
The VCR automatically selects
ANTENNA
or
CABLE
of the
Tuning Mode
feature in the
CHANNEL SETUP
menu
.
If you
need to change the setting manually, press
3
.
7. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the channels
are not active, have weak signals, or you do not want to watch
them.
A
. Press
VCR1
.
B
. Press
MENU•PROG
on the remote to see the
VCR MAIN MENU
on the TV screen.
C
. Press
4
to select the
CHANNEL SETUP
menu.
D
. Press
2
to select the
ADD/REMOVE CHANNEL
menu.
E
. Follow the directions on the screen.
F
. Add or remove more channels by entering channel numbers or
using
CHANNEL
up or down.
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
1 VCR Plus+ Programming
CHANNEL SETUP
1 Auto-Search Channels
1 Auto-Search Channels
VCR MAIN MENU
1 VCR Plus+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
1 VCR Plus+ Programming
Startup
9
CH 14
Searching Channels
CHANNEL SETUP
1 Auto-Search Channels
1 Auto-Search Channels
CHANNEL SETUP
1 Auto-Search Channels
2 Add/Remove Channels
2 Add/Remove Channels
ADD/REMOVE CHANNEL
CH 03
is presently ADDED
Press CLEAR to remove
Press MENU to exit
Summary of Contents for VR539
Page 47: ...45 Notes ...