1
Handset Set Up
There are six programmable menus available: Display Language, Tone/Pulse
Dialing, Local Area Code, Ringer Tone, Ringer Volume and Factory Default.
When you program these settings, make sure the phone is
OFF
(not in talk mode).
Pressing the *Exit button will remove you from the menu selection process without
changing the feature you are in.
Display Language
1. Press the Prog/Flash button until
1ENG 2FRA 3ESP
shows in the display.
2. Use the CID/Vol (
5
or
6
) buttons or the handset number pad to select
1.ENGLISH, 2.FRANCAIS, or 3.ESPANOL. The default setting is
1ENG
.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.
Tone/Pulse Dialing
1. Press the Prog/Flash button until
1TONE 2PULSE
shows in the display.
2. Use the CID/Vol (
5
or
6
) buttons or the handset number pad to select
(1) TONE or (2) PULSE. The default setting is
TONE.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.
Area Code
1. Press the Prog/Flash button until
- - - SET AREA CODE
shows in the display.
2. Use the handset touch-tone pad to enter your three digit area code. - - - is the
default setting.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.
Connections & Setup
