4
Setting Up the TV/VCR
Startup
AUTOMATIC CLOCK SET
What is your Time Zone?
1
Eastern
2 Central
3
Mountain
4 Pacific
5
Alaska
6 Hawaii
7 Don't Know
AUTOMATIC CLOCK SET
Does your area observe
Daylight Savings Time?
1
Yes, DST is observed
2 No
3 Don't know
AUTO CHANNEL SEARCH
Now scanning channel 1
AUTOMATIC CLOCK SET
The TV/VCR is now
setting the clock.
This may take
several minutes.
Press MENU to cancel
TV/VCR MAIN MENU
1 Timer Recordings
2 Picture Quality
3 Time
TIME
1 Set clock
SET CLOCK
Time --:-- - -
(hour:minute)
Date --/--/--
SET CLOCK
Time 05:07 AM
Date 11/18/98 Wednesday
Press CLEAR to correct
7. Set the clock and auto channel search automatically.
When the
AUTOMATIC CLOCK SET
screen appears, follow
these steps to automatically place channels in the TV/VCR’s
memory and set the clock using the Coordinated Universal
Time information transmitted by some broadcast stations.
Note: Coordinated Universal Time information is not
broadcast in all areas. If it is not available in your area, you
must set your clock manually.
A
. Press a number (
1-6
) on the remote corresponding to the
time zone you live in. If you do not know your time zone,
press
7
.
B
. Press
1
if your area observes daylight savings time from
April to October, or press
2
if it does not. If you do not
know, press
3.
C
. Press
MENU
on the remote if all antenna or cable
connections are completed. The
AUTO CHANNEL SEARCH
will be performed, followed by automatic clock set.
If the message
The Auto Clock Set was unsuccessful
a p p e ars, set the clock manually. The clock must be set before
you can use the timer recording or wake-up timer features.
Set the clock manually.
If the
AUTOMATIC CLOCK SET
was unsuccessful or you want
to manually set the clock:
A
. Press
MENU
on the remote to display the
TV/VCR
MAIN MENU
.
B
. Press
3
to display the
TIME
menu.
C
. Press
1
to display the
SET CLOCK
screen.
D
. Use the number buttons on the remote to enter the time
including AM or PM, month, day, and year. The day of the
week will automatically appear after you enter the year.
• Press
0
before single-digit numbers. Press
1
for
AM
or
2
for
PM
. Example: press
0,
then
5,
then
0,
then
7,
then
2
for a time of
5:07PM.
• Press
CLEAR
on the remote at any time to change
incorrect entries.
E
. Press
MENU
on the remote to start the clock.
To display the time and date, press
DISPLAY
on the remote
.
