9
Using the TV/VCR Features
Channel Labeling
You can label up to twenty-two channels with the station name
(such as ABC, NBC, CBS, etc.) for easier identification. Labels can
be up to four characters.
To Label the Channel
1
. Press
MENU
to display the
TV/VCR MAIN MENU
.
2.
Press
5
to display the
SETUP
menu.
3.
Press
7
to display the
LABEL CHANNELS
screen.
4.
Press
CHAN
up or down or 0-9 to change the channel number if
necessary. Then, press
VOL
< or
>
to move the cursor to the
Channel Label
column.
5.
Press
CHAN
or , and then
VOL
< or
>
to select each letter of
the station name.
6
. Press
MENU
to save the channel name.
To Clear a Channel Name
While in the channel label column, press
RESET
to remove
all characters.
TV/VCR MAIN MENU
1 Timer Recordings
2 Picture Quality
3 Time
4 Closed Captioning
5 Setup
SETUP
1 Auto channel search
2 Add/Remove channels
3 Auto play
4 Auto repeat
5 Alert sound
6 Signal type: CABLE
7 Label Channels
LABEL CHANNELS
Channel Channel
# Label
8 ----
↑
LABEL CHANNELS
Channel Channel
# Label
10 ABC
↑
Press Chan up/dn or 0-9
to change # or letter
Press Vol < or > to move
MENU=save CLEAR=Reset
RESET PICTURE CONTROLS
All picture controls
have been reset to
factory defaults.
Press MENU to continue
Commercial Skip
Commercial Skip is an on-screen timer that allows you to bypass
commercials. When a commercial comes on, you can activate the
Commercial Skip timer to run from 30 seconds to 59 minutes. While
the timer is counting down, you are free to watch other channels.
After the timer runs out, the TV/VCR automatically changes back to
your original channel.
Besides using Commercial Skip to switch back to the current station
after a block of commercials, you can also use it as a reminder that a
favorite program is about to start.
Note: The Commercial Skip timer cannot be activated if a tape is
loaded in the TV/VCR.
1.
Press
SKIP/SEARCH
repeatedly until the desired time amount is
displayed. Each press increases the time in 30 second increments
up to 4 minutes. After 4 minutes, each press increases the timer
by 1 minute until 59 minutes is reached.
2. To cancel Commercial Skip, press
CLEAR
on the remote. The TV
will not change channels.
Skip 0:30
To Reset Picture Controls to the Factory Setting
Press
3
in step
3
of “To Adjust the Video” to reset the picture
controls to the levels set at the factory. Or, press the remote’s
RESET
button.
Using the TV/VCR Features
