20
Advanced Sound Control
Stereo
The Stereo mode uses the two main channel outputs
from the front speakers. Use this mode if you have
connected the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real
environment such as (DSP OFF / STADIUM / CONCERT /
THEATRE / CHURCH / ARENA / CLUB). DSP automati-
cally converts analog audio signals to digital ones
which enables you to adjust the sound without
degrading the sound quality. Different modes will
give you different feel of size and type of listening
environment. Press DSP MODE on the main unit to
select among DSP options.(Not available in Dolby
Digital/DTS).
If you are using the remote control, press the
SETUP
button to access the setup menu. Press the Left or
Right keys until DSP MODE is displayed and press
OK
to enter DSP menu. Use the Up or Down arrows to
select among DSP options. Press
OK
to confirm your
selection.
Night Mode
By using Dynamic Range Compression technology
(Night Mode), you can enjoy enhanced Dolby Digital
sound quality at night without interrupting your
roommates or neighbors. Night Mode will compress
the difference in volume between normal voices and
sound like explosions, while still enjoying a Dolby
Digital enable component (DVD, SAT). You can access
the setup menu by pressing
SETUP
. Then press the
Up or Down setup arrows on the main unit or Left or
Right arrows on the remote control until NIGHT is dis-
played. Press
OK
to enter Night setup. Use the Up or
Down setup arrows to select among compression
options (NORMAL, SOFT and SOFTER). Press
OK
to
save setting.
EQ Mode
Sound can be adjusted to resemble various music
types. Bass and treble levels vary between the differ-
ent music styles. Press
EQ
on the main unit to select
the desirable music style (FLAT, ROCK, POP, JAZZ,
CLASSIC and VOCAL).
When using the remote control, press
SETUP
key to
access the setup menu. Use the Left and Right arrow
setup keys until EQ MODE is displayed. Press
OK
to
enter EQ menu. Use the UP and Down setup arrows
to toggle among EQ selections and press
OK
to con-
firm.
Dolby ProLogic
II
To provide a an exciting experience while listening to
music, DPL
II
provides several advanced setting to
adjust the DPL
II
Music mode. By modifying the set-
tings, you will be able to adjust the music output
effect according to different Home Theater set up,
recordings and to suit better your personal tastes. The
3 options are Panorama, Dimension and Center
Width.
Dimension control:
Adjust the balance between the rear and front speak-
ers. Depending on the recordings, the sound may be
focused too much on the front or on the rear speak-
ers. Adjusting this parameter will allow a more bal-
ance sound field.
Center width control:
Control the "weight" or sense of image width of the
sound coming from the center speaker. By adjusting
the variable setting, the sound can only come from
the center speaker or could be progressively blended
into the 2 front speakers.
Panorama mode:
Increase the front stereo imaging by using the rear
speakers to increase the surround and "wraparound"
effect. Select "on" to enable Panorama mode.
To access this setup, press the following sequence:
1. Press
SETUP
on the main unit to access the Setup
menu.
OPEN/CLOSE
G
OK
MEMORY
SETUP
TEST TONE
E
SETUP
TEST TONE
EQ
DIGITAL INPUT
ST/M
SURR. MODE
OPEN/CLOSE
OK
ORY
SETUP
TEST TONE
EQ
DIGITAL IN
ST/M