5
EN
Before Bluetooth pairing, you should turn on the
Bluetooth function of your other device (such as,
mobile phone with Bluetooth function).
1. Press SOURCE button on the unit or button on
the remote control to select BT (Bluetooth) mode.
The Bluetooth indicator light on the soundbase
will blink.
2. On your device (mobile phone, MP3 player, etc.),
select RCA RTS7131B from the list of available
Bluetooth connections.
Note: If your Bluetooth device (such as, mobile
phone) requires a password while pairing, please
enter 4-digit number: 0000.
• If the Bluetooth pairing is successful, the
Bluetooth indicator will illuminate.
• If the Bluetooth pairing is unsuccessful, the
Bluetooth indicator will blink at slow speed.
Please try again.
TO DISCONNECT THE CURRENTLY pAIRED
DEvICE
1. On your currently paired and connected device,
select RCA RTS7131B from the list and disconnect
it. Or
2. Turn off the connected device.
ENjOY THE MUSIC THROUGH BLUETOOTH
• Press
to begin or pause playback
• Press
/
to select a specific track
• Press and hold
/
to start moving
backward/forward at high speed.
BLUETOOTH pAIRING
BASIC OpERATION
1. Press
button on the Soundbase or button
on the remote to turn on the unit.
2. Press SOURCE / or AUX, OPTICAL, LINE
IN and button directly on the remote to select
AUX IN, OPTICAL IN, LINE IN or Bluetooth source
(input). The LEDs located on top of Soundbase
will indicate the currently-selected source.
3. Press VOL / , BASS / or TREBLE /
on the remote to adjust Volume, Bass or Treble
levels. When adjusting Volume, Bass or Treble,
the four LEDs will temporarily display the current
level setting (see illustration).
Note: When mute is enabled, the 4 LED indicators
will flash. Press the MUTE button on the remote
control to disable the mute function and LED flashing
stop.
Specifications and external appearance are subject to change without notice.
TROUBLESHOOTING
The unit does not switch on.
• Make sure it is plugged in.
• Press STANDBY/ON button to turn on the
Soundbase.
I have no sound.
• Press the VOLUME / button on the top of the
Soundbase or VOL / button on the remote.
• Ensure the source you’ve selected is outputting
audio. If you’re using “audio out” from your TV,
ensure your TV is configured to output audio (see
TV’s menu settings).
• Ensure your AV connections are properly made
(ensure you don’t have any loose connections).
• Ensure you’ve selected the correct source (input)
- the LEDs located on the top of the Soundbase
will indicate the currently-selected source (input).
• Mute is activated (the 4 LEDs on top of the
Soundbase flashes). Press the mute button on the
remote control.
• Ensure the input source is selected PCM output on
the setup menu of the input device.
Cannot setup Bluetooth pairing
• Reset the bluetooth connection by turning off and
on your connectind device, or this Soundbase, or
select other SOURCE on this Soundbase then back
to BT mode again.
The remote control doesn’t work
• If battery is weak, please replace the battery and
ensure the new battery is installed correctly.
• Please ensure there is nothing blocking the remote
sensor on the front of the Soundbase.
