10
EN
Settings
9
EN
Settings
Showing Demonstration
Press
DEMO
to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold
CLOCK
on the remote control
until the hour flashes on the display.
2. Press
SKIP BACKWARD
or
SKIP
FORWARD
to set the hour and then press
CLOCK
to shift to minute digits.
3. Press
SKIP BACKWARD
or
SKIP
FORWARD
to set the minute.
4. Press
CLOCK
to save settings and
STOP
to quit setting.
Setting the Timer
1. Press and hold
TIMER
on the remote control
until Timer On and the clock hour flashes on
the display.
2. For setting time, press
SKIP BACKWARD
or
SKIP FORWARD
to set the hour and
then press
TIMER
to shift to minute digits.
3. Press
SKIP BACKWARD
or
SKIP
FORWARD
to set the minute.
4. Press
TIMER
to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press
TIMER
to select source. Press
SKIP
BACKWARD
or
SKIP FORWARD
to
select TUNER / TUNER REC / DISC / USB
/ CARD.
If TUNER REC is selected, press
SKIP
BACKWARD
or
SKIP FORWARD
to select the preset station.
6. Press
TIMER
to set volume. Adjust
VOLUME
CONTROL
to select desired volume level.
7. Press
TIMER
to save settings.
Press
STOP
to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release
TIMER
to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
Note:
When system is ON, you can press
CLOCK
to display the current time for about 2
seconds.
Timer
On 00:00A
Timer
Source
Tuner
Timer
On 00:00A
Off 00:00P
Timer
Volume
10
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press
SLEEP
to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press
SLEEP
once to
view remaining sleep time.
Adjust Sleep Time
Press
SLEEP
again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Sound Features
Volume Control
Rotate the volume control on the main unit or
press
VOL
or on the remote control to
adjust volume level. The volume level shows
briefly on the display.
Bass Boost
Press
B.BOOST
to turn on/off boosting the bass
frequency. The BASS BOOST icon lights on the
display when it is activated.
Muting Audio
Press MUTE on the remote to cut the sound
(Remote Only). MUTE flashes on the display.
Using Preset Equalizer Curves
Press
EQ
to toggle among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
Creating a Custom Curve
1. Press
EQ
to select CUSTOM mode.
2. While CUSTOM is displayed, press
SKIP
BACKWARD
or
SKIP FORWARD
to
cycle among displayed bass and treble range
levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press
EQ
to exit.
BAS +2
TRE 00
Custom
RS2052 EN 4/12/05 11:32 AM Page 16
