6
EN
Settings
Display
Setting the Clock
1. Press
CLOCK•TIMER
once to display clock time.
2. Press
TUNING -
or
+
on the main
unit or
tune
or on the remote
control to set the hour and then press
PROG•SET•CLEAR
to shift to minute digits.
3. Press
TUNING -
or
+
on the main
unit or
tune
or on the
remote control to set the minute.
4. Press
PROG•SET•CLEAR
to save settings and
STOP
to quit setting.
Setting the Timer
1. Press
CLOCK•TIMER
twice until the ON and
clock time is displayed ( ON - timer on time ).
2. To set timer on hour, press
TUNING -
or
+
on the main unit or press
tune
or
on the remote control.
3. Press
PROG•SET•CLEAR
to shift to minute
digits.
4. Press
TUNING -
or
+
on the main
unit or press
tune
or on the
remote control to set the minutes.
5. Press
PROG•SET•CLEAR
for source selection.
6. To select source, press
TUNING -
or
+
on the main unit or press
tune
or on
the remote control. (CD or Tuner)
7. Press
PROG•SET•CLEAR
for volume
adjustment.
8. To select volume level, press
TUNING -
or
+
on the main unit or press
tune
or on the remote control.
9. Press
PROG•SET•CLEAR
for timer off time
setting.
10.To set timer off time, Repeat step 2 to 4.
11.Press
PROG•SET•CLEAR
to save settings or
STOP
to quit setting.
Activating the Timer
Press and hold
CLOCK•TIMER
to turn the timer
on/off. The timer icon lights on the display
when timer is activated.
Note:
• When system is ON, you can press
CLOCK•TIMER
to display the current
time for about 2 seconds.
Note:
Timer can not be set or activated if clock
time is not set. SET CLK will flash on the
display when you try to activate the timer.
Follow instructions under “Setting the
Clock” to set clock.
If timer settings have not been entered,
SET TMR will flash on the display when you
try to activate the timer. Follow instruc-
tions under ”Setting the Timer” to enter
timer settings.
If timer off time is set as the same as
timer on time, TIMER NG will flash on the
display. Set the correct timer off time
again.
RS2035 EN 2/12/04 10:06 AM Page 11
