21
20
If your TV will be turned on, you will be able to use its features.
Press the CH +/CH- button on the control panel or the Numerical keys
on the remote control.
TURNING THE TV ON
VOLUME ADJUSTMENT
PROGRAM SELECTION
BASIC OPERATION
First, connect power cord correctly. When the indicator
illuminates red is standby mode.
Press the POWER / button on the remote control then the
indicator illuminates orange, after the TV initialization finished,
the indicator turns to green. It means the TV is in power mode.
When you press the POWER / button on the remote
control once again, the power/stand-by Indicator illuminates red
in standby mode.
If you intend to be away on vacation, disconnect the power
plug from wall power outlet.
Turning on the TV
1. Press the VOL +/VOL- button on the control panel or the
VOL +/VOL- button on the remote control to adjust the volume
.
2. If you want to switch the sound off, press the MUTE/ button
on the remote control.
3. You can resume the sound by pressing the MUTE/ button
on the remote control.
CONNECTIONS & SETUP
TV
1. Connect the 3.5 mm earphone plug into the
headphone socket of the unit on left side.
2. Unplug the earphone will resume the
sound from the loudspeakers.
EARPHONE
EARPHONE CONNECTION
DVD
Y Pb Pr
L
R
Y=GREEN, Pb=BLUE, Pr=RED
1. Connect the video outputs (Y, PB, PR) of the DVD to the
YPbPr jacks on the set
2. Connect the audio outputs of the DVD to the Audio Input (L/R)
jacks on the set.
3. Turn on the DVD player, insert a DVD.
4. Select YPbPr source with using the
SOURCE/
button on the remote control.
5. Refer to the DVD player's manual for operating instructions.
YPBPR CONNECTION
When connecting with a component cable
