Copyright © 2016 RCA Communications Systems
Prodigi
TM
RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
14
Connecting Audio Accessories
The accessory connector is located on the side
of the radio. It is used to connect RCA audio
accessories to the radio. Remove the accessory
cover by unscrewing the screw location at
the bottom of the cover. Connect the desired
audio accessory firmly into the accessory jack
and secure the screw by turning it clockwise.
(See Figure 6)
Figure 6
Note:
Please loosen the
screw prior to removing
the audio accessory.
The use of the audio
accessory may affect the
waterproof performance
of the radio
.
Turn On/Off the Radio
1. Rotate the On/Off/Volume Control Knob
clockwise until you hear a click. (See Figure
8) The LED blinks green and a brief tone
sounds, indicating that the power up test
is successful. The RDR2550
TM
/RDR2600
TM
radio displays “RCA PRODIGI” followed by
“RCA RDR2550
TM
”or “RCA RDR2600
TM
”.
2.
To turn off the radio, rotate this knob
counterclockwise until you hear a click.
Note:
There is no power up tone if the radio
tones/alerts function is disabled. If your radio
does not power up, check your battery. Make
sure that it is charged and properly attached.
If your radio still does not power up, contact
your RCA Communications Systems dealer.
Summary of Contents for RDR2600
Page 1: ...two way radio ...