RCA RCD135, User Manual

Page: 9 / 17

Tuning to a station
1. Press POWER/CD/RADIO/TAPE to select radio
mode.
2. Press BAND to select between AM and FM
band (MW/LW/FM for Thomson model).
3. Press TRACK/TUNE or to select radio
station.
Tips Tips Tips Tips Tips :
Press and hold
TRACK/TUNE TRACK/TUNE
TRACK/TUNE TRACK/TUNE TRACK/TUNE or for
more than 1 second to automatically tune to
the next station.
4. Press DIGITAL / - to adjust your
desired listening level
Tips Tips
Tips Tips Tips :
Extend or reposition the antenna for better
FM reception. Move the unit for better AM
(MW/LW for Thomson model reception).
Radio
Setting presets manually
1. Press BAND to select between AM/FM(RCA)
or MW/LW/FM (Thomson bands).
2. Press TRACK/TUNE or to access the
desired frequency.
3. Press SET .
4. Press REPEAT/PRESET repeatedly to assign
program number.
5. Press SET to confirm.
6. Repeat steps 2 to 5 to preset to a maximum
of 10 channels for FM & AM (MW) band,
and 5 channels for LW (Thomson model
only)
Auto preset
Press and hold BAND to set presets
automatically. The display will show AUTO.
Once a station is found, the search stops briefly
to allow you to listen to the station.
• Press TRACK/TUNE or at this time if
you decide not to store selected station.
• If you decide to store the station in preset
memory, wait a few seconds and the search
will resume.
Using presets
1. Press BAND to select between bands.
2. Press REPEAT/PRESET to enter preset mode
and PRESET 1 shows.
3. Press REPEAT/PRESET repeatedly to access
your desired preset stations.
5
EN
RCD135 EN 9/13/02, 10:05 AM 7