Contents
FCC information
Before you begin ................................. 1
General controls ................................... 2
Remote Control .................................... 3
Display ................................................... 3
Settings .................................................. 4
Radio ..................................................... 5
Before you begin
AC Power
Plug the power supply
cord into the AC power
jack on the back of the
unit, and into an AC
power supply outlet that
accepts the plug supplied
with your unit.
Note: Look in the battery compartment to find
the AC power cord.
Battery Power
You can insert 6 D-sized
alkaline batteries (not
supplied) and you can
take your stereo just
about anywhere. 3
“AA” batteries (not
supplied) are needed to
keep radio station
memory. Open the
battery compartment
door on the back of the
unit by pressing down on the arrow and pulling
out the cover. Insert batteries in the battery
compartment.(See diagram)
Note that the AC line cord must be
unplugged from the jack on the back of
the unit to operate on batteries.
1
EN
IMPORTANT
: Be sure to remove batteries when
storing the set for more than 30 days. Leaky
batteries can badly damage the system. Always
return tape operation buttons to their off
position before storing. This will relieve pressure
on certain parts in the tape recorder that might
deform after long periods of time. Be sure to
dispose of leaky, weak or dead batteries
properly according to federal, state, and local
regulations. To prevent injury or damage, do
not reverse batteries and do not mix battery
type.
CD Player ............................................... 6
Tape player ........................................... 7
Troubleshooting tips ............................ 8
Maintenance ......................................... 9
More Information ............................... 10
Limited Warranty (For U.S.) ............... 11
Limited Warranty (For Canada) ........ 13
RCD135 EN
9/13/02, 10:05 AM
3
