To change tracks:
Press the
TRACK
and
TRACK
buttons on the audio system, or use
the transport controls on your device.
To connect to a different Bluetooth device:
Press and hold the
BLUETOOTH
button for
3 seconds to reinitiate pairing mode. Then
connect to the RC345 through your phone’s
Bluetooth menu.
Using the Sleep timer
The Sleep timer automatically turns
the audio system off after a set
amount of time.
1. Play the audio you want to listen to—FM
radio or Bluetooth.
2. Press the
SLEEP
button—the timer starts
at 90 minutes. Additional presses decrease
the timer by 10 minutes to “
Off
.”
Using the USB Charger
This audio system offers USB
charging on its back panel. Simply
connect your device’s charging cable (not
included) to the USB CHARGING port on the
back panel of the audio system.
Using Smart Snooze
When your alarm goes off, all buttons on the
device will trigger the snooze function, not
just the
SNOOZE
button. The Beep, FM, or
Bluetooth indicator on the clock’s front panel
blinks while the alarm is snoozing.
To turn Smart Snooze off:
Press the
OFF
button.
Important:
When the alarm goes off, any
button press except for
OFF
triggers smart
snooze. So, for example, if you’re listening to
music from the radio or a Bluetooth device,
and the alarm goes off, pressing the Volume
buttons will trigger smart snooze, not increase
the volume. The music will stop and the
display will show ’09’, meaning that there are
9 minutes left in the snooze. To turn off Smart
Snooze, press the Off button.
WIRELESS AUDIO SYSTEM
STEREO
CLOCK RADIO
Quick Start Guide
Welcome to the RCA Bluetooth Wireless
Audio System Stereo Clock Radio. This
Guide takes you through the steps to get
started, quickly and easily!
Using the Audio System
Setting the Alarm
1. Press and hold the
ALARM SET
button. The hours digit on the
clock starts flashing.
2. Use the
VOLUME –
and
+
buttons to set the
hour. For PM, go past 12. To go faster, press
and hold.
3. Press the
ALARM SET
button again to
finish setting the hour. The minutes digits
starts flashing.
4. Use the
VOLUME –
and
+
buttons to set the
minutes. To go faster, press and hold.
5. Press the
ALARM SET
button again to
finish setting the minutes.
Note:
You can set the source for your alarm
to a simple beeping, FM radio or a Bluetooth
audio source. Press the
ALARM SOURCE
button when you’ve set the alarm to go
through the options.
Listening to the Radio
1. Press the
FM
button to switch to
FM radio.
2. Use the
TRACK/TUNING
and
TRACK/
TUNING
buttons to go through stations.
Press and hold to scan faster.
To turn the radio off, press the
OFF
button.
Note:
The thin wire on the back of the audio
system is the antenna for FM reception.
Listening to Bluetooth
If you’ve already paired a Bluetooth
device to this audio system, simply
press the
BLUETOOTH
button on the audio
system to reconnect at any time.
IMPORTANT:
Make sure Bluetooth is enabled
on your device and that the device is in range!
To adjust volume:
Press the
–
buttons on the audio system, or use the
volume controls on your Bluetooth device.
To pause/continue playback:
Press the
PLAY•PAUSE
button on the audio system,
or use the playback controls on your device.
DC 5V
For troubleshooting and support, visit
RCAAudioVideo.com
©2015 Voxx Accessories Corp.
RC345 QSG 02
