Installation
Don’t use a power cord, a
plug or a loose socket
which is damaged.
• Otherwise, it may cause a
fire or electrical shock.
Always ground the
product.
• There is risk of fire or
electric shock.
Do not modify or extend
the power cable.
• There is risk of fire or
electric shock.
Do not disassemble or
modify products.
• It may cause failure and
electric shock.
Always install the expansion
panel(s).
• Improper assembly or
installation may cause incorrect
operation, including injury, fire,
and poor performance, electric
shock hazards.
Do not use the power cord
near flammable gas or
combustibles such as gaso-
-line, benzene,thinner, etc.
• It may cause explosion or
fire.
Operation
Do not place heavy object
on the power cord and take
care so that the cord should
not be pressed.
Always install a dedicated
circuit and breaker.
Do not touch(operate) the
product with wet hands.
• There is danger of fire or
electric shock.
• Improper wiring or
installation may cause fire
or electric shock
• There is risk of fire or
electrical shock.
WARNING
SAFETY PRECAUTIONS
Do not place the power cord
near a heater.
• It may cause fire and
electric shock.
Do not allow water to run
into electric parts.
• It will cause failure of
machine or electric shock.
Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop
surface flaws.
If strange sounds, or small
or smoke comes from
product. Turn the breaker
off or disconnect the power
supply cable.
• There is risk of electric
shock or fire.
Do not open the suction
inlet grill of the product
during operation.
• Otherwise, it may electrical
shock and failure.
If water enters the product, turn
off the power switch of the
main body of appliance. Contact
service center after taking the
power-plug out from the socket.
2
2
