SLEEP
REMOTE CONTROLLER
It sends signals to the unit.
Signal ejecting window
TIMER SET &
TIMER
INCREASE button
ENERGY SAVER button
Used it to initiate or stop energy
saver operation. It is only functional
in cool mode and not available in fan
mode.
FAN SPEED button
TEMPERATURE
+
ADJUSTMENT button
TEMPERATURE
-
ADJUSTMENT button
ON/OFF button
OPERATION MODE
button
Turns unit ON/OFF.
Press it to change the fan speed
in the order of low-medium-high
-auto-low.
COOL
FAN
Press it to select the operation
mode:
In cool mode
decreases the setting
temperature by
every press of this
button
1
. If it is
pressed continuously the
temperature will decrease by 1
every 0.5 second after 1 second.
The range of setting temperature is
61-88
.
°
F(1
)
°
F
(1
)
°
F(16-31
)
In cool mode
increases the setting
temperature by
every press of this
button
1
. If it is
pressed continuously the temperature
will increase by 1
every 0.5
second after 1 second. The range of
setting temperature is 61-88
.
°
F(1
)
°
F(1
)
°
F
(16-31
)
SLEEP button
Press it once to start sleep function
and press it again to stop sleep
function.
TIMER SET &
TIMER
DECREASE button
01 02
…
Press it once, if the air conditioner is set timer
before the display will display the time of timer
and you can increase the time by pressing this
button ,if not, the timer function will be initiated
and
“01”
will be shown on the unit, which means
the time of timer is 1 hour. Every press of this
button increases the time by 1 hour(24hours
at most).If it is pressed continuously the time will
increase by 1 hour every 0.5 second after 1 second.
You can refer to the following:
24
quit timer function.
1.Press it once, if the air conditioner is set timer
before the display will display the time of timer and
you can decrease the time by pressing this button ,
if not, the timer function will be initiated and
“01”
will
be shown on the unit, which means the time of timer
is 1 hour. When the timer is set 1 hour, press this
button again the timer function will be stop. 2. When
the time of timer is set by the button
“
”, you can
decrease the time by pressing this button.
Every
press of this button decreases the time by 1 hour. If
it is pressed continuously the time will increase by
1 hour every 0.5 second after 1 second. You can
refer to the following: 24 23
01 quit
timer function.
>
…
NOTICE:
1.To operate, the remote should be within 6 meters of the unit with a clear line of sight.
2.Remove the batteries if the remote controller is not to be used for long periods of time.
For specific usage and function of all buttons, please refer to “ OPERATION PANEL” on Page 12-14.
HEAT mode is not applied to cool only type .
15
15
OPERATING INSTRUCTIONS
COOL