PREPARATION OF CHASSIS
Pull the guide panels and make them fit into the T shape groove from the top down, then insert and push
the frame into the guides of the air conditioner, as shown in FIG.7.
2
FIG.7
3
UPPER GUIDE
Fasten the upper guide(ITEM E) on the top of the air conditioner with 4 screws (ITEM A) as shown in
FIG.6.
FIG.6
ROOM SIDE
INNER SILL
CENTER
LINE
FIG.9
FOAM STRIP
(ITEM B)
FIG.8
Cut the adhesive-backed foam strip(ITEM B) to the window width. Remove the backing from the foam
strip and attach the foam strip to the underside of the bottom window. (FIG.8)
4
FOAM STRIP
9
9
INSTALLATION
ITEM A
T SHAPE GROOVE
1
1
GUIDE PANEL
The side clip must be put backside.
This side should be put on the front.
The Side Clip
The Middle Clip
ITEM D
ITEM H
ITEM I
Open the window and mark center line with pencil on the center of the inner sill, as shown in FIG.9.
5
LOCATE THE UNIT IN WINDOW
FIG.5
Install the curtain (ITEM D) into the curtain sash(ITEM H), please note that the side with middle clip
should be put inside the curtain sash, after that insert the curtain clip (ITEM H) into the curtain sash, as
shown in FIG.5. Therefore after the two guide panels are assembled, keep them for later use.
GUIDE PANEL