RCA RACE1011-6COM, Operating Instructions Manual

Page: 14 / 22

12
1. When the timer is not in use,
the operation mode and the set temperature will
be display. Time will be displayed under the timer
setting.
Digital Display:
and Button: 2. Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range: 61
~88 or 16 ~31 .
3. Turn the air conditioner on and
off.
Power Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto. 4. Mode Button:
1
2
3
4 5 6 7 8 9
AUTO
SPEED AUTO
MODE
WIFI
WIFI Symbol*
NOTE: * means only available for WIFI modes, For more
information, please see the WIFI manual.
Use these buttons on the control
panel and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button
or until the rest
time displayed is to your then press TIMER
button again.
Timer On: When the unit is off, press TIMER
button , set the temperature with
pressing the button
or . Press TIMER
button , set the rest time with
pressing the button or . Press TIMER
button , confirm the setting, then
Note: It can be set to automatically turn off or on in
0.5-24 . Each press of the
buttons will increase or decrease the timer.
The Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above.
The SET light will turn on while setting.
To cancel the
function, press the TIMER button
again.
liking
a second time
a third time will
automatically switch on and will show on the display.
hour increments
set
5. Timer Button:
Cool Mode: The cooling function allows the air
conditioner to cool the room and at the same time
reduces
a
i
r
. Press the MODE button to
activate the cooling function. To optimize the
function of the air conditioner, adjust the
temperature and the speed by pressing the button
indicated.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
the
MODE button to set the DRY mode. An
automatic
function of alternating cooling cycles
and air fan
is activated.
Fan Mode:
This function only works when the air
conditioner is vented.
Press
the
MODE button to
set the FAN mode. With pressing
the
FAN SPEED
button
,
the speed changes in the following
sequence: Hi, Med and Lo in FAN mode.
humidity
Auto Mode: In AUTO mode the unit automatically
chooses the mode of operation (COOL,DRY or
FAN).In this mode the temperature will be set
according to the room temperature (tested by the
temperature sensor which is incorporated in the
indoor unit.).