22
Using the Remote
Remote Buttons
ON•OFF
When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device
on and off. When pressed twice within two seconds, all devices that are
on will be turned off (this feature only works with most RCA, PROSCAN
and GE products).
VCR1
Puts the remote in VCR mode and if autotuning is enabled, it will
turn on the TV and tune to the correct channel.
TV
Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD
Puts the remote in DVD mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2
Puts the remote in VCR2 mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct channel.
LED
Red light which indicates programming mode when programming
the remote. Also displays when a valid remote button is pressed.
AUX
When pressed, will turn on the component you have programmed
it to control. Also turns on the TV if auto tuning is enabled and the
remote is programmed to control the TV.
SAT•CABLE
Puts the remote in SAT•CABLE mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct channel.
MUTE
Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
SKIP
Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v
Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL< or VOL>
Decreases or increases the TV’s volume.
SOUND
Press once to display the audio processor choice list. Point and
select to choose a different processor or press CLEAR to exit.
GO BACK
Returns you to the previous channel.
GUIDE
Brings up and exits the GUIDE Plus+ system.
In SAT•CABLE
mode, brings up available on-screen guides.
INFO
Brings up channel information.
MOVE (Arrows)
Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PIP window when
no menus are on the screen.
OK
When in the menu system, selects highlighted items or returns you
to the previous menu.
STOP
PAUSE
TV
ON OFF
AUX
DVD
SAT CABLE
PIP
SWAP
RESET
CH CTRL
PLAY
FORWARD
REVERSE
SOUND
GO BACK
CH
+
CH
-
V
O
L
V
O
L
SKIP
MUTE
