RCA P42WED33 User Manual Download

Page: 44 / 52

Chapter 5

Other Information

Blank screen

• Check your connections. If you used yellow, red, and white cables to connect, make sure they're connected to the

yellow, red, and white jacks on the side of the TV, not to the MONITOR OUT jacks on the back of the TV.

• If you're trying to watch something that's playing on a device connected to the TV (like a DVD), press INPUT until

you get to the correct video input channel.

• Press the ANTENNA button.

• Make sure the device connected to the TV is turned on.

• Try another channel.

Buttons don’t work

• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by

selecting the

Front Panel Block

in the

Parental control

menu and press OK to uncheck the box.

• Unplug the TV for ten minutes and then plug it back in. Turn the TV on and try again.

TV turns off unexpectedly

• Sleep timer may have been activated. Go to page 41 for instructions.

• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on

again. If this happens frequently, the voltage in your house may be abnormally high or low.

• Unplug. Wait ten minutes. Plug in again.

TV turns on unexpectedly

• Wake up timer might have been activated. Go to page 41 for instructions.

Can’t select certain channel

• Channel may be blocked or not approved in the

Parental Controls

menu.

• If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button

on your VCR).

• Press the ANTENNA button and then try to change channels.

Noisy stereo reception

• May

a weak station. Use

Sound

menu to choose mono sound.

Volume buttons not adjusting volume louder

• Check to make sure volume isn’t limited by the maximum volume feature. Go to page 40 for more instructions.

Black box appears on the screen

• Closed-captioning might be on. Check

Closed Caption

in the

Setup

menu. Go to page 39 for more instructions.

TV picture keeps switching between screen formats abruptly

• Switch

the

Automatic format

feature off. See page 37 for more information.

Book 1.indb 44

3/3/06 12:24:01 PM

Summary of Contents for P42WED33





















































Search results

Summary of Contents for P42WED33

Reviews:

Related manuals for P42WED33

Brands by name

Popular brands

RCA P42WED33, User Manual

Search results

Summary of Contents for P42WED33

Reviews:

Related manuals for P42WED33

Brands by name

Popular brands