RCA MRP1150, User Manual

Page: 13 / 72

Chapter 1 11
Connections and Setup
DVD TV + Dolby Pro Logic, Dolby
Digital or DTS Receiver
To Connect the DVD Player
1. Connect the audio cable(s).
A. Basic audio connection – Connect the left and right audio cables
to your audio/video r eceiver and to the AUDIO OUT L (left – white)
and R (right – r ed) jacks on the back of your DVD player .
OR
B. Optical digital audio connection – If you have a Dolby Digital or
DTS receiver with an optical digital connection, inser t an optical
digital cable (not pr ovided) in the OPTICAL digital audio out jack on
the DVD player . Connect the other end of the cable to the Optical
Digital Input jack on the back of the r
eceiver . You must also set the
Digital Output setting in the Sound menu (see Chapter 5).
OR
C. Coaxial digital audio connection – If you have a Dolby Digital or
DTS receiver with a coaxial digital connection, inser t a coaxial
digital cable (not pr ovided) in the COAXIAL digital audio out jack
on the DVD player . Connect the other end of the cable to the
Coaxial Digital Input jack on the back of the r
eceiver . You must also
set the Digital Output setting in the Sound menu (see Chapter 5).
2. Connect the video cable(s).
A. Basic video connection – Connect the video cable (yellow) to the
VIDEO OUT jack on the back of your DVD Player , and to the V ideo
Input jack on your TV .
OR
B. S-Video (optional) – If your TV has an S-V ideo Input jack, connect
the S-V ideo cable to the S-VIDEO OUT jack on the back of your
DVD Player and to the S-V ideo jack on your TV . If your TV doesn’ t
have S-V ideo, use the basic video connection listed above.
OR
C. Component video (optional) – If your TV has component video (Y ,
P
B
, and P
R
jacks) use video-grade cables for the Y , P
B
, and P
R
connections. Note that it is essential to match the color -coded
connectors with a compatible TV . If your TV doesn’ t have
component video, use the S-V ideo or Basic video connection listed
above.
3. Set the VIDEO OUT SELECT switch to S-VIDEO or YPbPr , depending on
the type of connection you used. Either setting works for the Basic video
connection (2A).
Go to page 14