Copyright © 2015 RCA Communications Systems
27
MRM400
TM
VHF Marine Two-Way Radio Instruction Manual
4. Edit the specified MMSI code by pushing
[
▲
] or [
▼
].
- Push [16] or [CH/WX] to move the cursor
forward or backward, respectively.
5. Input your 9-digit code, then push [DSC] to
set the code.
- Returns to normal operation.
Note:
- This code programming can be performed
only twice. After the code has been
programmed, it can be changed only by your
dealer or distributor.
MMSI CODE CHECK
The 9-digit MMSI (DSC self ID) code can be
checked.
DIGITAL SELECTIVE
CALLING (DSC)
OPERATION
MMSI CODE PROGRAMMING
Your 9-digit MMSI (Maritime Mobile Service
Identity) is a number that identifies your boat.
It can be programmed at Power ON.
1. Rotate [VOL] to turn power OFF.
2. While pushing and holding [DSC], turn
power ON to enter MMSI code programming
function.
3. After the display appears, release [DSC], and
cursor starts blinking.
