21
Using the Remote
MENU•PROG
Brings up the Main menu and selects highlighted items.
When in VCR mode, it functions as a PROGRAM button for RCA, GE and
PROSCAN VCRs.
RESET
Resets picture quality controls to the
Bright Lighting
Picture
Control Preset. Point and select to choose a different Picture Control
Preset. Also used to reset the settings in a menu.
MOVE (Arrows)
Used to point to different items in the menu system.
Also used to adjust the menu controls. Outside of the menu system, the
MOVE buttons can also be used to adjust the position of the PIP window
on the screen.
PIP
Brings up the small picture-in-picture window. Press again to
remove the PIP window. When
PIP Caption Display - Alternate with PIP
has been selected, will display captioning in the PIP window.
SWAP
Swaps the main picture with the PIP window.
MOVE PIP and FREEZE
These buttons are for an earlier model of your
TV. The MOVE PIP function has been replaced by the MOVE arrows. The
FREEZE button is not functional for the MR27555, MR29315, MR32555 &
MR32575.
Using the INPUT Button
Use the INPUT button to toggle through the available input sources (VID/
SVID and the current channel) and view the component you have
connected to the TV.
1.
Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned ON.
2.
Press INPUT to tune to the available input source and view the
component.
3.
Press INPUT again to tune back to the channel you were previously
watching.
Modes of Operation
Because this universal remote can control
several different components (Laserdisc
player, VCR, Cable Box, etc.) it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV.
Summary of Contents for MR27555
