RCA MR240 Instruction Manual Download

Page: 37 / 44

MR240

VHF Marine Two-Way Radio Instruction Manual

■

DANGER! NEVER

incinerate a used battery pack since internal battery gas may cause them to

rupture or may cause an explosion.

■

DANGER! NEVER

solder the battery terminals, or NEVER modify the battery pack. This may cause

heat generation, and the battery may rupture, emit smoke or catch fire.

■

DANGER!

Use the battery only with the transceiver for which it is specified. Never use a battery

with any other equipment, or for any purpose that is not described in this instruction manual.

■

DANGER!

If fluid from inside the battery gets in your eyes, blindness can result. Rinse your eyes

with clean water, without rubbing them, and see a doctor immediately.

■

WARNING!

Immediately stop using the battery if it emits an abnormal odor, heats up, or is

discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor.

■

WARNING!

Immediately wash, using clean water, any part of the body that comes into contact

with fluid from inside the battery.

■

WARNING!

NEVER put the battery in a microwave oven, high pressure container, or in an induction

heating cooker. This could cause overheating, a fire, or cause the battery to rupture.

■

CAUTION:

Always use the battery within the specific temperature range for the transceiver (–4°F

to +140°F; –20°C to +60°C) and the battery itself (–4°F to +140°F; –20°C to +60°C). Using the
battery out of its specific temperature range will reduce the battery’s performance and battery life.

Summary of Contents for MR240













































Search results

Summary of Contents for MR240

Reviews:

Related manuals for MR240

Brands by name

Popular brands

RCA MR240, Instruction Manual

Search results

Summary of Contents for MR240

Reviews:

Related manuals for MR240

Brands by name

Popular brands