RCA L26HD31 - 26" LCD TV User Manual Download | Manualshive

Page: 52 / 52

background image

ENERGY STAR® and the ENERGY STAR mark are registered U.S. marks manufactured under
license from Dolby Laboratories.

“Dolby” and the double-D symbol are registered trademarks of Dolby Laboratories.

SRS and

are trademarks of SRS Labs, Inc.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•

Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICeS-003.

Visit the RCA website at www.rca.com/television

Please do not send any products to the Indianapolis address listed in this manual or on the carton. This

will only add delays in service for your product.

TTE Technology, Inc.
101 West 103rd Street
Indianapolis, IN 46290

©

2008 TTE Technology Inc.

RCA and associated marks are trademarks of THOMSON S.A.
used under license to TTE Corporation.
Printed in USA
Part No.: 72-RS86A1-E001A

«
...
50
51
52

Summary of Contents for L26HD31 - 26" LCD TV





















































Reviews:

No comments

Related manuals for L26HD31 - 26" LCD TV

Brand: Ole Pages: 2

Brand: Avalue Technology Pages: 62

Brand: Lenovo Pages: 29

Brand: Lenovo Pages: 36

THINK VISION E2223

Brand: Lenovo Pages: 32

Brand: Lenovo Pages: 31

Brand: RCA Pages: 48

Brand: Black Box Pages: 36

Scape X sx65-006

Brand: interactive scape Pages: 27

Scape X sx43-006

Brand: interactive scape Pages: 27

Scape Tangible st65-004

Brand: interactive scape Pages: 26

Brand: TECOM Pages: 28

Brand: VAF instruments Pages: 33

Brand: IAS Pages: 6

Brand: janitza Pages: 32

Brand: Philips Pages: 24

Brand: Philips Pages: 34

Brand: Philips Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands