18
Selecting a channel
A.
Select Channel by using
CH+/-
or
the
number buttons.
• Selelct the memorized channels, use
CH+/-
or
the
number buttons.
• Selelct the non-memorized channels, use
the
number buttons.
B.
To use
the
number buttons:
e.g.
Analog TV channel
-When selecting channel
12
, press
1,
press
2
, then press
OK.
e.g.
DTV channel
-When selecting digital channel
12.3
, be sure to press the dot (•) before
entering the subchannel number. press
1,
press
2
, press the dot (•), press 3, then press
OK.
C. Press
GO BACK
to return to the previously viewed channel.
What is the subchannel
By using high compression techknology, digital broadcasting offers a service that enables multiple
signals to sent simultaneously. Therefore, you can select more than one program per main channel
since digital broadcasting technology distinguish between multiple channels by a single network.
Turning your TV on or off
1.
Plug the power cord into an AC power outlet.
2. Press to turn on your TV.
3. Press again to turn off your TV. When you turn off the TV, it goes into standby mode.
Warning:
When your TV is in standby mode, it is still receiving power. To completely disconnect
power, unplug the power cord.
Selecting the video input source
1.
Turn on your TV, then press
INPUT
on the remote. The
Input
list opens.
2. To selelct an input source, press
INPUT
repeatedly, or
press
to highlight the video source, then press
OK
.
Adjusting the Volume
This section describes how to adjust the volume. The mute function, which turns the sound off and on,
is also described.
A. use
VOL+/-
to adjust volume.
The volume bar will be displayed at the bottom of the TV screen when adjusting the volume.
• The volume bar will automatically disappear in a few seconds.
B. Press
MUTE
to turn off and on the sound.
Mute mark is diaplayed on the TV screen for a few seconds.
Press
MUTE
again or
VOL +/-
to recover the orignal volume.
Input
VID
CMPT No Lable
HDMI No Lable
TV
No Lable
