Removing the Table Stand
Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand
by following the instructions below.
Step 1
Place the plastic bag off the TV and place it on a
table or other flat surface. Place the TV set face
down on the TV bag.
Step 3
Attach the stand cap to the TV cabinet.
TV cabinet with stand cap attached.
Connections and Setup
Chapter 1
7
Step 2
Remove the table stand from the TV cabinet. Use a
screwdriver to remove the four M4 ST-screws.
Mounting Your TV to the Wall
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
100x100 refers to fact that the mounting measurements are 100mm horizontally and 100mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution:
Your wall
mount must be able to
bear a minimum of five
times the TV’s net
weight to avoid causing
damage.
To mount your TV to the wall, purchase a VESA wall
Models L19HD41
Purchase a VESA 100 x100, Size M4 screw
