background image

Buttons and Other Jacks on Your TV

Side Input Jacks

SERVICE

  For service use only.

AUDIO/VIDEO INPUT 2 (VID 2) 

Lets you connect a component that has composite video jacks, such as

a VCR or DVD player.

• L  AUDIO

 Provides left audio connection when using the VIDEO INPUT 2 jack. The left audio connectors

are usually white. For mono audio sources, be sure to use the left AUDIO INPUT.

• R AUDIO

 Provides right audio connection when using the VIDEO INPUT 2 jack.The right audio connector

is usually red.

HEADPHONES

 Allow you to connect headphones to listen to the sound coming from the TV.

Side Panel Buttons

If you cannot locate your remote, you can use the side panel buttons on your TV to operate many TV

features.

(    ) POWER 

Turns the TV on and off.

MENU

 Brings up the TV Main Menu.

VOL (    )

 

Increases the volume. In the TV menu system, it acts like the right arrow on the remote control

and can be used to select menu options.

VOL (    ) 

Decreases the volume. In the TV menu system, it acts like the left arrow on the remote control

and can be used to select menu options.

CH (    )

 Scans up through the channel list. In the TV menu system, it acts like the up arrow on the remote

control and can be used to select menu options.

CH (    ) 

Scans down through the channel list. In the TV menu system, it acts like the down arrow on the

remote control and can be used to select menu options.

18

     

Chapter 1 

   

Connections and Setup

Summary of Contents for L19HD41









































Reviews: