12
Chapter 2
Using the Remote Control
Graphics contained within this publication are for representation only.
STOP
PAUSE
TV1
ON OFF
TV2
DVD
SAT CABLE
PIP
SWAP
RESET
CH CTRL
PLAY
FORWARD
REVERSE
CC
GO BACK
CH
+
CH
-
V
O
L
V
O
L
SKIP
MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1
2
3
4
5
6
7
8
9
0
WHO INPUT
VCR1
VCR2
RECORD
SYSTEM
u n i v e r s a l
PLAY
Plays a videotape or disc.
RECORD
If the remote is in VCR mode, press
to start recording.
RESET
Returns the picture to the original
settings and displays the Picture Presets choice
list.
REVERSE
Press REVERSE to go backwards on a
videotape or disc.
SAT•CABLE
Puts the remote in SAT•CABLE
mode. If you set up Auto Tuning, pressing
SAT•CABLE tunes the TV to the correct channel.
SKIP
If you press SKIP before you change the
channel, the TV waits 30 seconds and then goes
back to the original channel. Each subsequent
press adds 30 seconds to the skip time. Press
CLEAR to cancel.
STOP
Stops playing a videotape or disc.
PIP, SWAP and CH CTRL do not have a function
for these models
VCR1
Puts the remote in VCR mode. If
you set up Auto Tuning, pressing VCR1
tunes the TV to the correct channel.
Arrow buttons (up, down, left, right)
Use to
move through the on-screen menus. Also moves
PIP window to different areas on the screen.
INFO
Displays channel information.
WHO•INPUT
In TV mode, press to toggle
through the available Video Input channels. In
SAT mode, press to select available channel lists.
MUTE
Lowers the volume to its minimum level.
Press again to restore volume.
ON•OFF
Turns the TV on and off. When the remote is
in another mode and the remote is programmed to
operate that component, press ON•OFF to turn that
component on and off.
VOL (up and down) buttons
Decrease or
increase the TV’s volume, unless Volume Hold
is enabled. Go to Chapter 1 for more
information on Volume Hold.
TV1
Turns on the TV and puts the remote in TV1
mode. Go to Chapter 1 for more information on
TV1 mode.
0-9 (Number buttons)
Use to enter channel
numbers and time settings. To enter a two-digit
channel, press the two digits. To enter a three-
digit channel, press and hold the first digit for
two seconds until two dashes appear to the
right of the number, then add the second two.
TV2
Turns on the TV and puts the remote in TV2
mode. Go to Chapter 1 for more information on
TV2 mode.
CH (up and down) buttons
Scan up or down
through the current channel list.
CLEAR
Removes any menu or display from the
screen and returns you to TV viewing.
DVD
Puts the remote in DVD mode. If you set up
Auto Tuning, pressing DVD tunes the TV to the
correct channel.
FORWARD
Press to advance a videotape or disc.
GO BACK
Tunes to the last selected channel or
video input.
GUIDE
Displays the Channel Guide.
OK
Press OK to select a menu item that is
highlighted.
PAUSE
Press to pause playback.
VCR2
Puts the remote in VCR mode to control
a second VCR. If you set up Auto Tuning, pressing
VCR2 tunes the TV to the correct channel.
ANTENNA
Functions as TV/VCR button in VCR
mode and TV/receiver button in SAT•CABLE
mode.
L.E.D.
Lights when you are programming the
remote.
MENU
Displays the TV’s Main menu.
CC
Displays the
Closed-Caption Display
.
Universal Remote Buttons (CRK76TK1)
SYSTEM
This button allows the remote to
change between TV1 and TV2 mode. It also
allows access to system-defined functionality,
when available. See the description later in this
chapter for more details.