RCA IP110 Operation Manual Download Page 39

Page: 39 / 49

Programmable keys

The keys from 0-9 (memory keys) on the keypad are editable. Users can customize
specific features for these keys according to their needs. (The keys are only avail-
able when the phone is in idle mode).

This function can only be set via the Web interface:

PHONE

[

FUNCTION keys (Memory Key)

Configuration of function keys for idle mode is:

- Up key: access to dialed list

- DOWN key: access to CALL FORWARD

- LEFT key: access to call log

- RIGHT key: access to account switch

- OK key: access to status

- DND key: access to DND

- Line keys Configuration

The phone has 2 line keys to which functions can be assigned out of a list of func-

tions. The following list shows the functions you can set on the Line keys. The next

paragraphs provide a description for each function. The default configuration for
each key is Line.

- Line

- Speed Dial

- Conference

- Forward

- Transfer

- Hold

- DND

- Call Return

- Pick Up

- Call Park

- Voicemail

- Prefix

- Redial

Note: Many of those features require IP PBX or service provider support and hence

must be configured in the server first in order to work on your phone. Contact your

system administrator or Technical support for more details.

In addition, please note that not all the servers support the above-mentioned

features.

Summary of Contents for IP110


















































Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands

RCA IP110, Operation Manual

Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands