8
9
Press the
icon in the Live View screen to access the following customizable
parameters of your camera.
Audio turns audio on/off for recording and live viewing.
Status Light turns the LED on the front of the camera on/off.
Night Vision turns the camera’s night vision feature on/off.
Alarm Notification lets you set notification schedules for when you want to
receive alerts. Also lets you set the motion detection area for alerts and the
detection sensitivity, as well as the sound the camera makes when motion is
detected.
Time Zone, Daylight Savings Time, and Date Format let you adjust the time
zone, daylight savings time, and date format settings you made during setup.
Wi-Fi lets you change WiFi network information for your camera and keep the
device active on the new network. This is a convenient option if you get a new
wireless router, for example.
Storage Status lets you format the a memory card (not included). A dot next to
this item in the menu means that the SD card requires attention.
Device Version shows you the firmware version of the camera. A dot next to this
item in the menu means that a firmware update is available. Choose this option
and following the instructions to update.
Image Encryption increases the security of the video from the camera. This
option is on by default.
Change Password lets you change the device password for image encryption
(the default password is your camera’s verification code).
Sleep Mode makes the camera stop monitoring and recording.
Tour of the System: Using the Settings Menu
Tour of the System: Camera
Microphone
IR Light supplements
ambient light for
nightvision
Indicator light shows the camera’s status:
solid red
— the camera is starting up
solid blue
— video is being viewed in the App
slow flashing blue
— the camera is working
fast flashing blue
— the camera is ready for
WiFi setup
slow flashing red
— there’s a network problem
fast flashing red
— there’s an SD card problem
Camera lens
Speaker
Front
Back
Power jack (behind the flap)
RESET button returns
all camera settings
to factory defaults
(press and hold for 5
seconds)
Magnetic base
micro SD card slot
holds an SD card
(not included) for
recordings (class
10 recommended,
128GB maximum
capacity)
