2
Setup and Connection
Step 1:
Unpack the TV and remote control.
Step 2:
Connect your TV. Connect the cable from your cable system or off-air
antenna to the cable in-jack on the back of the TV, as shown.
Step 3:
Plug in the TV. Plug the end of the power cord into the wall outlet,
matching the wide blade of the plug with the wide slot in the outlet. Be
sure to insert the plug completely.
Step 4:
Put batteries in the remote.
1.
Remove the battery compartment cover from the back of the remote.
2.
Insert batteries as shown, matching the + and – ends of each battery
in the compartment.
3.
Replace the cover.
Step 5:
Turn on the TV.
•
Press the POWER button on the remote or front panel.
Read the next section, Using the Menu System, which is a brief overview
of the basic rules for getting around in the menus using the remote or the
TV's front control panel.
Step 6:
Auto Channel Search.
Perform an Auto Channel Search (described in the Channel menu section).
TV
ANTENNA, CABLE, CABLE BOX OR VCR
CABLE/
ANTENNA
Getting Started
Channel Marker
The Channel Marker comes up when you first turn on the TV, change
channels, or press the DISPLAY button.
08:59
Displays the current time.
WRTV
Displays the label assigned to the current channel.
06
Displays the current channel.
Sleep
Displayed when the Sleep Timer has been set.
Stereo
Displayed when the current channel is broadcasting in Stereo.
CC
Displayed when Closed Captioning is available.
Mute
Displayed when you mute the audio.
Unlocked
Displays whether the V-Chip system is locked, unlocked, or
disabled.
01:30
Displayed to count down time left on the commercial skip timer.
08:59
WRTV
06
Sleep
Stereo
CC
Mute
Unlocked
1:30
The Channel Marker shown is just an example
of what your screen may look like.
Caution:
If you choose to use a stand
with your TV, take precautions that the
stand or other furniture the TV is placed
on is properly located and of adequate
size and strength to prevent the TV from
accidentally being pushed off, pulled off,
or tipped over. This could cause damage
to the TV and/or personal injury.
You can press MENU or CLEAR to make the
Channel Marker disappear; it will disappear
automatically after a short time.
