15
Connecting Your TV
Cable-TV Connections
ANTENNA
Back
of
TV
A
B
Incoming
Cable
Incoming
Cable
Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna. Since cable-TV systems
vary, you may wish to consult your local cable-TV company for additional information.
ANTENNA
IN
OUT
CABLE BOX
Incoming
Cable
Remember to tune your TV to the
output channel of the cable box (usually
2, 3, or 4) when selecting channels via
the cable box.
C
Follow this diagram if your cable company does not require a cable box (no scrambled channels):
Follow this diagram if your cable company requires a cable box that can be controlled by remote control:
Follow this diagram if your cable company requires a cable box that cannot be controlled by remote control:
Back
of
TV
ANTENNA
A
B
IN
OUT
CABLE BOX
A
B
C
C
C
Back
of
TV
The “A” position on the A/B switch lets you select all
non-scrambled channels by the TV’s remote.
The “B” position allows you to select scrambled channels
via the cable box. Remember to tune your TV to the
output channel of the cable box (usually 2, 3, or 4)
when selecting channels via the cable box.
Note: These optional accessories (2-way
splitter , A/B switch , and three coaxial
cables ) are available as a kit under
#AH041BL.*
A
B
C
* Optional accessories are available from most dealers or electronics supply stores.
