manualshive.com logo in svg

RCA DVD/VCR, User Manual

Share
Download
RCA DVD/VCR User Manual Download Page 53

Chapter 6

49

Additional Information

The picture is distorted

•

The disc might be damaged. Try another disc.

Picture is distorted during forward and reverse scan

•

It is normal for some distortion to appear while scanning.

A screen saver appears on the TV

•

Your player is equipped with a screen saver that appears on the TV after your player has been idle
for several minutes. To make it disappear, press STOP or CLEAR on the remote.

Subtitle and/or audio language is not the one selected from the initial setting

•

If the subtitle and/or audio language does not exist on the disc, the initial settings will not be seen/
heard. The disc’s priority language is selected instead. Set the subtitle and/or audio language
manually through the Info Display or the player menu.

The menu is displayed in a foreign language

•

The Language menu (Player Menus) is set to that language. Go to 

Languages

 (In Spanish, shown as

Idiomas; in French, as Langues) in the main DVD player menu and select the 

Player Menus

 option

(In Spanish, shown as Menús del Lector; in French, as Menus Lecteur) Highlight the language you
prefer, and press OK.

Play doesn’t begin

•

The rating of the title on the disc exceeds the rating limit set in the 

Ratings Limits

 menu. Unlock

the player and/or change the rating limit in those menus.

No forward or reverse scan

•

Some discs have sections that prohibit rapid scanning, or title and chapter skip.

•

If you’re trying to skip through the warning information and credits at the beginning of a movie,
you won’t be able to. This part of the movie is often programmed to prohibit skipping through it.

Desired angle cannot be changed

•

Most discs don’t have the multi-camera angle system, and some discs only have multiple angles
during certain parts of the movie.

Picture is too tall and thin

•

Change the aspect ratio: go to the main menu, select 

Display,

 select 

TV Image

. Go to page 43 for

more information.

Picture is too short and wide

•

Change the aspect ratio: go to the main menu, select 

Display

, select 

TV Image

. Go to page 43 for

more information.

16166400.06 Additional

5/29/03, 10:02 PM

49

Summary of Contents for DVD/VCR





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands