Chapter 1
11
Connections and Setup
Auto Channel Search
Before you can watch channels through the VCR, you must
set the type of signal you have (cable or TV) and search for
all available channels.
1. Press MENU to display the VCR Main Menu.
2. Press the down arrow button until
TUNING
is
highlighted, and press
OK (the Tuning menu appears).
3. Press the down arrow button until
TUNING BAND:
is
highlighted, and press the right arrow button until the
type of signal you have is shown (
CATV
or
TV
).
4. Press the up arrow button until
AUTO CHANNEL SET
is
highlighted, and press the right arrow button (auto
channel search starts). This may take several seconds.
When finished, your available channels appear. To add or
delete any channels, see page 36.
Time and Date
The VCR gives you two ways to set the time and date: the
Auto Clock Set feature or manually.
Auto Clock Set
Auto Clock Set searches for day/time information
automatically through the broadcast signal.
1. Press MENU to display the VCR Main Menu.
2.
CLOCK
should already be highlighted, so press
OK (the
Clock menu appears).
3.
AUTO CLOCK SET:
should already be set to
ON
. If it’s not,
use the arrow buttons to highlight it and then press the
right arrow button to choose
ON
.
4. Press the down arrow button until
DAYLIGHT SAVING:
is
highlighted, and press the right arrow button until the
desired setting is shown (
AUTO, ON,
or
OFF
).
• If you choose
AUTO
, the VCR sets the clock using the
DST information from the broadcast signal.
• If you choose
ON
, the VCR adjusts the clock when the
Daylight Savings Time begins or ends.
5. Press the down arrow button to highlight
TIME ZONE
,
and press the right arrow button until your time zone is
shown (
AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC,
ALASKA
, or
HAWAII
).
AUTO
CHANNEL
SET
TUNING
BAND:
TV
CH.
ADD/DEL:
CH.
2
ADD
SOURCE
SELECT:
TUNER
SELECT
TO
EXIT
PRESS
ADJUST
MONTH
:
JANUARY
DAY
:
1
WED
YEAR
:
2003
TIME
:
12
:
00
AM
SELECT
TO
EXIT
PRESS
ADJUST
AUTO
CLOCK
SET
:
ON
DAYLIGHT
SAVING:
AUTO
TIME
ZONE:
AUTO
Note: If Auto Clock Set receives the
wrong time or date information, you
may need to set the clock manually.
continued on next page
16166400.01 Connections
5/29/03, 10:02 PM
11
