background image

DVD player

right side

To 12V power outlet

To DC IN 9V-12V

jack

2

Car Power Adapter

1

E - 5

E - 2

E - 3

E - 1

E - 4

   

Connections

1)   DC OUT 9V-12V Jack
2)  AUDIO & VIDEO IN Jacks
3)  VOLUME Control

 

Adjusts the volume.

4)  Headphone Jack
5)  LCD Screen
6)  BRIGHTNESS Control 

 

Adjusts the relative lightness or 

darkness of the screen.

7)  COLOR Control

 

Adjusts the color intensity.

8)  Screen Switch

 

WIDE: Wide-screen format

 

NORMAL:  Pan  &  scan  (full-

screen) format

9)  OFF/ON Switch
10)  DC IN 9V-12V Jack

Monitor

   

Power Supply

A. Watching a DVD on the DVD Player and 

the Monitor

You  can  watch  the  same  DVD  on  the  DVD 

player and the monitor.

Watching a DVD on the DVD Player and 

the Monitor

1.  Connect  the  DVD  player  and  the  monitor 

using the included DC-AV Cable.

2.  Turn on the DVD player and the monitor.

3.  Play a DVD on the DVD player; the monitor 

will play the same DVD at the same time.

1

2

3

4

6

5

7
8
9

10

11

12

11)  STANDBY Indicator
 

When  the 

OFF/ON

  switch  is  in  ON  position,  the  light  will 

illuminate.

12)  Stand

Using the DVD Player and the Monitor Together

Using the DVD Player or the Monitor Separately

A. Using the Car Power Adapter

The included 12V car power adapter is designed for use with vehicles that have a 12V, negative ground electrical system.

IMPORTANT

This car adapter is for use with 12 volt batteries only.

WARNING:

Disconnect this car power adapter when 

not in use. Not for use in 24V vehicles.

Monitor - 

left side     right side

DC-AV cable

(included)

To A/V OUT &
DC IN 9V-12V
jacks

To A/V IN &

DC OUT 9V-12V

jacks

1

2

Car Power
Adapter

To DC IN 9V-12V
jack

4

DVD player

right side

To 12V
power outlet

3

Monitor 

right side

To 12V power outlet

To DC IN 9V-12V

jack

1

2

Car Power Adapter

Cautions:

•  Use this unit only with the included 12V car power adapter. Use with other car adapters could     damage 

the unit, or even your vehicle.

•  The  included  12V  car  power  adapter  is  for  use  with  this  unit  only.  Do  not  use  it  with  any  other 

equipment.

•  In the interest of traffic safety, drivers should not operate the unit or view videos while driving.

•  When the inside of the 12V power outlet is dirty with ashes or dust, the plug section may become hot due to poor 

contact. Be sure to clean the 12V power outlet before use.

•  After use, disconnect the 12V car power adapter from both the unit and 12V power outlet.

•  If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident and cause 

damage, injury, or death.

•  Check your local traffic laws for rules governing the use of video devices in vehicles.

Monitor - 

left side

DC-AV cable

(included)

To A/V OUT &
DC IN 9V-12V
jacks

To A/V IN &

DC OUT 9V-12V

jacks

DVD player

right side

This unit can play

 

 

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region Management 

Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region 

number of this unit, it cannot play that disc.

The region number of this unit is 1.

   

Disc Formats

Notes on Unauthorized Discs

You  may  not  be  able  to  play  some  DVDs  on  this  unit,  particularly  if  they  were  purchased  from  outside  your 

geographic area or made for business purposes.

   Important Safety Instructions

1.  Read these instructions. 
2.   Keep these instructions. 
3.   Heed all warnings. 
4.   Follow all instructions. 
5.   Do not use this apparatus near water.
6.   Clean only with a dry cloth.
7.   Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.
8.   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

9.   Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two 

blades  with  one  wider  than  the  other.  A  grounding  type  plug  has  two  blades  and  a  third  grounding 

prong. The wide blade or the third prong  are provided for your safety. If the provided plug does not fit 

into your outlet, consult an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.
12.  Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold 

with  the  apparatus.  When  a  cart  is  used,  use  caution  when  moving  the  cart/apparatus 

combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightning storms or when unused for long periods of time.
14.  Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the  apparatus  has  been 

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

DVDs

[8cm/12cm disc]

Compatible

Audio CDs

[8cm/12cm disc]

Disc Function or Operation that is Not Available

When the   symbol appears on the screen, it indicates that the function or operation attempted is not available at 

that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions 

may not be available on some DVDs. Be sure to read the documentation provided with the DVD. 

Title, Chapter and Tracks

•  DVDs  are  divided  into 

“titles”

  and 

“chapters”

.  If  the  disc  has  more 

than  one  movie  on  it,  each  movie  would  be  a  separate 

“title”

“Chapters”

 are sections of titles.

•  Audio CDs are divided into 

“tracks”

. A 

“track”

 is usually one song on 

an Audio CD.

Note: 

Numbers  identify  each  title,  chapter,  and  track  on  a  disc.  Most  discs  have  these  numbers  recorded  on  them,  but 

some do not.

Chapter1

Title1

Title2

Chapter2 Chapter3

Chapter1 Chapter2

Track1

Track2

Track3

Track4

Track5

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce 

from one to 5.1 discrete channels of excellent quality audio.
The  unit  automatically  recognizes  the  Dolby  Digital  bitstream  and  provides  a  downmix  suitable  for  two-channel 

listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel soundtracks 

available on many DVDs. 

   

Sound System

  

 Accessories

Please check and identify the supplied accessories.

Remote Control (with battery) ....................................................................................................................................................... x 1

Car Power Adapter .............................................................................................................................................................................. x 1

Mounting Strap .................................................................................................................................................................................... x 2

DC-AV Cable .......................................................................................................................................................................................... x 1

Icons Used on DVDs

Sample lcons

Note: 

When  playing  back  a  CD-G  (Graphics)  or  CD  EXTRA 

disc, the audio portion will be  played, but the graphic 

images will not be shown.

Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator

   

Remote Control

Using the Remote Control

•  Point the remote control at the REMOTE SENSOR located on 

the unit.

•  When there is a strong ambient light source, the perform ance 

of  the  infrared  REMOTE  SENSOR  may  be  degraded,  causing 

unreliable operation.

Remove the PLASTIC 

sheet before 

USINg

 

the Remote Control.

   

Control Reference Guide

Notes:

•  If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by 

battery leakage corrision.

•  When discarding batteries, environmental problems must be considered and local rules or laws governing the 

disposal of these batteries must be strictly followed.

2.  Insert one CR2025 (3V) size battery.

TO CHANGE REMOTE BATTERY

1.  Open the battery door.

   

Remote Control

Remote Control

WARNING: 

Do not dispose of the battery in a fire or it may leak and/or explode.

WARNING: 

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION:

 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

1)

 

VIDEO MODE Button

 

 

Adjusts  Brigntness,  16:9  Screen/4:3  Screen  or 

Contrast of the LCD screen.

2)

 

 PREV Button

 

Goes  back  to  current  or  previous  titles/chapters/

tracks.

3)

 

 /   SEARCH Buttons

 

 SEARCH:

 Fast reverse playback.

 

 SEARCH:

 Fast forward playback.

4)

 

GOTO Button

 

Skips directly to a location on a CD/DVD.

5)

 

Cursor ( ,  ,  ,  ) Buttons

 

 

Use to move between selections on a menu screen 

and adjust certain settings.

 

ENTER Button 

 

Confirms selections on a menu screen.

6)

 

MEMORY Button 

 

 

In PLAY mode, sets titles/chapters in a favorite order.

7)

 

Number (0 - 9) Buttons

 

Use when creating programs and locating a title/

chapter/track or specific time.

8)

 

REPEAT A-B Button

 

Performs point-to-point repeat playback on a DVD 

or CD.

 

REPEAT DISC Button

 

Repeats a DVD chapter or title.

 

Repeats a CD track or the entire disc.

 

SETUP  Button

 

Opens  and  closes  the  SETUP  menu  while  in  stop 

mode.

9)

 

MENU Button

 

Opens and closes the DVD menu.

10)

 

 NEXT Button

 

Advances titles/chapters/tracks.

11)

 

 STOP Button

 

Stops playing a disc. 

 

 PLAY Button

 

Starts or resumes playback of a disc.

 

 PAUSE Button

 

Pauses playback of a disc. Each time you press the 

 

PAUSE

 button the picture advances one frame 

on a DVD. Press the   

PLAY 

button to resume 

playback.

12)

 

DISPLAY Button

 

Shows status information on the screen.

13)

 

ANGLE Button 

 

Switches  between  multiple  camera  angles 

when  the  DVD  you  are  playing  has  been 

programmed with multiple camera angles.

14)

 

AUDIO Button 

 

Selects  one  of  the  audio  sound  tracks 

programmed  on  a  DVD  or  select  the  audio 

output mode on an Audio CD.

15)

 

SUBTITLE Button 

 

 

Selec ts  one  of  the  subtitle  languages 

programmed on a DVD (if available).

 

RETURN Button

  

 

Returns  to  normal  operation  after  using  the 

SETUP menu of a DVD.

BATTERY REPLACEMENT

When  the  battery  becomes  weak, 

the  operating  distance  of  the  remote 

control will be greatly reduced and you 

will need to replace the battery.

1)  

   

Button

 

Press the   button and hold the front 

panel to open the disc door. 

2) 

 

SEARCH Button

 

Performs fast reverse playback.

 

 

SEARCH Button

 

Performs fast forward playback.

 

 PREV Button

 

Goes back to current or previous titles/

chapters/tracks.

 

 NEXT Button

 

Advances titles/chapters/tracks.

 

 STOP Button 

 

Stops playing a disc.

 

 PAUSE Button 

 

Pauses  playback  of  a  disc.  Each  time 

you  press  the   

PAUSE

  button  the 

picture advances one frame on a DVD. 

Press  the   

PLAY 

button  to  resume 

playback. 

 

 

PLAY Button

 

Starts or resumes playback of a disc.

3)  STANDBY / ON Switch

4)  LCD Screen

5)  Headphone Jack

6)  VOLUME Control

 

Adjusts the volume.

7)  Remote Sensor

 

Receives the remote control signal.

DVD Player

8)  AUDIO & VIDEO OUT Jacks

9)  DC IN 9V-12V Jack

10) STANDBY Indicator

 

When the 

STANDBY / ON

 switch is slide to ON position, 

the light will be on.

11) Stand

1

2

4

5

6

8

7

9
10

11

3

D. Connecting Game Systems/Video Equipment (for the Monitor Only)

You can connect game systems or other video equipment for playback using the monitor.

Watching video equipment

1.  Connect the other equipment to the monitor using a standard AV Cable (not included).

2.  Turn on the monitor.

3.  Turn on the video equipment and follow the instructions provided with it to playback.

Notes: 

•  Make  sure  to  use  the  correct 

Audio/Video cable. Connecting 

the plugs incorrectly may cause 

a weak signal.

•  If  you  have  a  mono  VCR,  the 

volume level from the speakers 

will be low.

Game System /

Video Equipment

Monitor - 

left side

AV cable

(not included)

To A/V IN jacks

E. Using the Monitor with Other Equipment while Playing DVD on the DVD Player

You can connect a game console or other video equipment to the monitor while viewing a DVD on the DVD player.

Watching Video Equipment on the Monitor while Viewing a DVD on the DVD Player

1.  Connect the power connector between the DVD player and the monitor. Do not connect the Audio/Video portion 

of the DC-AV cable. 

2.  Connect the monitor to the other equipment using a standard AV cable (not included).

3.  Turn on the DVD player, the monitor and the other equipment.

4.  Play a DVD on the DVD player. 

5.  Use the monitor for the other equipment.

Notes: 

•  Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.

•  If you have a mono VCR, the volume level from the speakers will be low. 

Monitor - 

left side     right side

AV cable

(not included)

DC-AV cable

(included)

Game System /

Video Equipment

To A/V OUT &
DC IN 9V-12V jacks

Connect to
Car Power 
Adapter

To A/V IN &
DC OUT 9V-12V
jacks

DO NOT CONNECT

DO NOT CONNECT

DVD player

right side

Watching a DVD on your TV

1.   Connect  your  TV  to  the  DVD  player  using  a 

standard AV Cable (not included).

2.  Turn  on  the  TV  and  follow  the  instructions 

included with it to play the DVD.

Notes: 

•  Make sure to use the correct Audio/Video cable. 

Connecting  the  plugs  incorrectly  may  cause  a 

weak signal.

•  If  your  TV  does  not  have  Audio/Video  inputs, 

you will need to purchase an RF modulator (sold 

separately) and follow the instructions included 

with it to connect the unit to your TV.

B. Connecting a TV (for the DVD Player Only)

If  your  TV  has  Audio/Video  inputs,  you  can 

connect  the  DVD  player  to  your  TV  using  a 

standard A/V cable (not included).

TV

DVD player

right side

AV cable

(not included)

C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only)

The DVD player can play two channels Dolby Digital.

Listening on External Audio Equipment

1.   Connect  the  DVD  player  to  the  left/right 

Audio In jacks on the other equipment using a 

standard Audio cable (not included).

2.  Turn  on  your  audio  equipment  and  follow 

the  instructions  provided  with  it  to  select  the 

AUDIO IN function.

Notes:

•  Make  sure  to  use  the  correct  Audio  cable. 

Connecting  the  plugs  incorrectly  may  cause  a 

weak signal.

•  If you have a stereo VCR, make sure you set it to 

stereo mode.

•  Due  to  copyright  protection,  DVD  movies 

cannot be copied. If you copy a DVD movie onto 

a videotape, the resulting copy will be unclear, 

with poor sound quality. This is NOT caused by a 

defective DVD system.

DVD player

right side

AV cable

(not included)

DO NOT CONNECT

DO NOT CONNECT

   

Safety Precautions

* SEE BACK OF UNIT FOR GRAPHIC SYMBOLS *

This product 

contains a low 

power laser device.

T H I S  C L A S S  B  D I G I TA L  A P PA R AT U S 

COMPLIES WITH CANADIAN ICES-003.

WARNING: 

TO  REDUCE  THE  RISK  OF 

ELECTRIC  SHOCK,  DO  NOT  REMOVE 

COVER  (OR  BACK).  NO  USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICINg TO QUALIFIED 

SERVICE PERSONNEL.

WARNING: 

TO  PREVENT  FIRE  OR  SHOCK 

HAZARD, DO NOT EXPOSE THIS APPLIANCE TO 

RAIN  OR  MOISTURE.  DO  NOT  PLACE  OBJECTS 

FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.

C A U T I O N :

 

U S E   O F   C O N T R O L S   O R 

A D J U S T M E N T S  O R  P E R F O R M A N C E  O F 

PROCEDURES  OTHER  THAN  THOSE  SPECIFIED 

MAy  RESULT  IN  HAZARDOUS  RADIATION 

EXPOSURE.

CAUTION: 

DANGER OF EXPLOSION IF BATTERY 

IS  INCORRECTLY  REPLACED.  REPLACE  ONLY 

WITH THE SAME OR EQUIVALENT TyPE.

CAUTION 

INVISIBLE LASER RADIATION

WHEN OPEN.  

AVOID EXPOSURE TO BEAM.

The  lightning  flash  with  an  arrowhead  symbol, 

within  the  equilateral  triangle,  is  intended  to 

alert  the  user  to  the  presence  of  uninsulated 

"dangerous  voltage"  within  the  product's 

enclosure that may be of sufficient magnitude to 

cause an electric shock.
The  exclamation  point  within  the  equilateral  

triangle  is  intended  to  alert  the  user  to  the 

presence of important operating and maintenance 

(servicing) instructions in this owner’s manual.

WARNING:

•   Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.

•   The AC/DC adaptor is used as disconnect device.

•   The AC/DC adaptor of apparatus should not be obstructed OR should be easily accessed during intended used.

•   To be completely disconnect the power input, the AC/DC adaptor of apparatus shall be disconnected from 

the mains.

Notes on Copyright

It  is  forbidden  by  law  to  copy,  broadcast,  show,  broadcast  on  cable,  play  in  public,  or  rent  copyrighted  material 

without permission.

Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited 

viewing uses only.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual 

property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended 

for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or 

disassembly is prohibited.

On Placement

•  Do not use the unit in places that are extremely hot, cold, dusty, or humid.

•  Place the unit on a flat and even surface.

•  Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by 

placing it on carpeting.

•  To avoid magnetized, do not place the unit near speaker or magnet.

•  Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht, etc) where it would be 

exposed to high temperatures above 104°F (40°C).

•  No naked flame sources such as lighted candles should be placed on the car power adapter and main unit. 

•  The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, 

shall be placed on apparatus.

On Safety

•  When connecting or disconnecting the car power adapter, grip the plug and not the cord itself. Pulling the cord 

may damage it and create a hazard.

•   When you are not going to use the unit for a long period of time, disconnect the car power adapter.

On Condensation

•  When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. 

When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours 

before turning the power on, or gradually heat the room and allow the unit to dry before use.

Rating Plate and Marking Information Location

•  The rating plate and marking information are located on the back of unit.

FCC Statements
NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of the following measures:

–  Reorient or relocate the receiving antenna.

–  Increase the separation between the equipment and receiver.

–  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–  Consult the dealer or an experienced radio/TV technician for help.

WARNING:

 Changes or modifications to this unit not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment.

AVC Multimedia

Markham, Ontario L3R 1E3

http://www.RCAav.com
Read these instructions before using your new product for the first time.

User Manual

DRC99731

7" Dual Screen Mobile DVD System

Reviews: