Chapter 2
Playing Discs
Regional Coding
Both the DVD Player and the discs are coded by region.These regional codes must match in
order for the disc to play.This player’s code is
region 1
. ALL means all regions. Other regions are:
2: Europe, the Middle East, Rep. of South Africa, Japan - 3: Southeast Asia,Taiwan - 4: Central
America, South America, Australia, Mexico, New Zealand - 5: Russian Federation, Africa (except
Egypt and Rep. of South Africa), India, Pakistan - 6: China.
How to load and play a disc
Turn on your DVD Player.
1
. Sit the player on a table or on a steady surface
2.
Unlock the screen by pushing the locking clip to the right.
3.
Raise the screen to the open position.
4.
Turn on the DVD player (slide the ON•POWER•OFF switch to the ON position.
5.
Press the OPEN button (the disc compartment door opens). Place a disc gently into the tray
with the disc’s label facing up (double-sided discs have content on both sides, so you can place
the disc with either side up).
3.
Close the disc compartment door.The DVD Player reads the disc’s table of contents, and
then one of three things happens depending on how the disc was programmed:
• The disc starts playing
• The disc menu appears. One of the options will start playing the disc. Highlight that option
and press OK.
• The DVD Player’s main menu appears (since the
Play
menu is already highlighted, just
press the OK button) or press PLAY.
Compatible discs
This DVD Player is capable of playing the following types
of discs: DVDs,Video CDs, and CDs with mp3 files,WMA
files (Windows Media Audio), and JPEG files on them.
Before you put a disc in the player, make sure it is
compatible.
You can’t play the following types of discs: Laserdiscs,
CD-I, CD-ROM (computer-only discs), DVD-ROM, or
discs recorded using other broadcast standards (i.e. PAL
or SECAM); CD-G discs.
Note: Some discs may not be compatible due to laser
pickup and design.
DVD+Rewritable
10
Graphics are for representation only.Your unit may differ slightly.
