36
Chapter 4
Using the TV’s Menu System
Graphics contained within this publication are for representation only.
Chapter 4
37
Using the TV’s Menu System
Graphics contained within this publication are for representation only.
Continues on next page...
PIP Menu
Display Mode
Off
No window is displayed.
PIP
PIP window is displayed.
POP
POP window is displayed.
PIP channel
Allows you to choose the channel displayed in the PIP or main
POP window. Scroll through channel list as well as the VID1, VID2 and FRNT
input channels.
PIP size
Allows you to choose the size of the PIP window:
Small
,
Medium
or
Large
.
PIP position
Allows you to choose where the PIP window appears on the
screen:
Top right
,
Top left
,
Bottom right
or
Bottom left
.
Note: Pip size and position are not available for POP.
Setup Menu
The Setup menu lets you configure the TV to fit its surroundings and your
preferences. To access the
Setup
menu, press MENU on the remote, and then
select
Setup
from the main menu.
Channel setup
Signal Type
The TV chooses the signal type during the initial setup. If you
change how you receive broadcasts through the antenna input, you must
change the
Signal type
setting. Choose
Cable
if you are using cable or a
cable box for TV signals. Choose
UHF/VHF Antenna
if you are using an off-
air antenna for TV signals.
Auto channel search
Searches for channels the signal is receiving. Go to
page 16 for more information.
Auto channel update
Searches for any new channels that are not in your
channel list and adds them to the list.
List and labels
Edit the channels in the list or choose labels for each
channel. Go to page 17 for more information.
Preferences
Language
Displays a choice list that lets you select your preferred
language for the menus:
English
,
Español
or
Français
.
Maximum TV volume
Allows you to set how high volume turns up when
you press the VOL+ button. Highlight
Maximum volume
, then press and
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
