background image

Safety 

 will operate on 100-240 volts AC, 

 Hz, and has a polarized plug. Because one

s wider than the other, the plug 

 in the wall socket only one way. Do not defeat the safety feature of this plug. If

sion cord, use a polarized cord.

CAUTION: 

To prevent electric shock, match wide blade of plug to wide slot of wall socket and fully insert the

plug. To prevent electric shock, do not use the polarized plug on the AC adapter/charger with an extension cord.
receptacle, or other outlet unless the blades can be inserted fully to prevent blade exposure.

 EN GARDE: 

Pour eviter les chocs e’lectriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’au fond. Pour 

 les chocs e’lectriques, ne pas utiliser la fiche

 cet appareil 

 une rallonge, une prise de courant ou une autre sortie,   moins que les lames 

puissent etre 

   fond sans qu’aucune 

 ne 

 

   

educe the risk of electric shock, do not remove the cover or back. No user-serviceable parts are inside. If you spill

corder, disconnect the AC adapter/charger’s power cord to prevent possible fire or shock hazard and consult

1. Moisture can damage internal parts. Refer all service to Authorized RCA Compact Camcorder

Safety Instructions for AC Adapter/Charger” below before using the AC adapter/charger.

al safety. Powerline-operated equipment or accessories connected to this unit should bear the UL listing

ark on the accessories themselves and should not have been modified so as to defeat the safety features.

 hazard from electric shock or fire. If in doubt, contact qualified service personnel.

t fire or shock hazard. do not expose camcorder and AC adapter/charger to rain or moisture.

T h symbol of a lightning flash
wi hin a triangle is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
wi 

 the product’s enclosure and

nitude to constitute a risk of

An exclamation point within
a triangle is intended to alert
the user to the presence of
important operating and
maintenance (service)
instructions in the literature
accompanying the product.

Caution: 

Avoid operating your

camcorder immediately after moving
it from a cold location to a warm
location. Give the camcorder 1 

 to

2 hours to reach a stable temperature
before inserting a video cassette. When
moved from a cold area to a warm
location, moisture may condense on the
head drum inside the machine. This
moisture could cause the tape to stick
to the headwheel and damage the
headwheel or tape.

Before using   AC adapter/charger, read all instructions and
cautionary mar ings on     AC adapter/charger, (2) battery, and
(3) product 

 g battery.

 

Caution: To 

 

 risk of injury, charge only rechargeable

batteries type

 or 

 Other types of batteries

may burst 

 ng personal injury and damage.

Do not expose he 

 to moisture of any kind.

Use of an 

 meht not recommended or sold by the battery

charger manuf 

 may result in a risk of fire. electric shock.

or injury to 

To reduce risk
cord with the p ug tither than the cord when disconnecting the
adapter/charge

Make sure the

f damage to electric plug and cord. pull out the

from the wall outlet.

ord is located so that it will not be stepped on.

tripped over, or otherwise subjected to damage or stress.

Use of an impr per extension cord could result in a risk of fire

and electric sh ck. If an extension cord must be used. make sure
that:

1. Pins on the

lug of the extension cord are the same number,

size and sha

as’ those of the plug on the adapter/charger.

i

2. Extension cord is properly wired and in good electrical

condition. and

3. Wire size below is met:

Minimum AWG Size

Length of Extension Cord (Feet)

18

Equal to or less than 100

16

Equal to or less than 150

Do not operate adapter/charger with a damaged cord or plug.

Replace it immediately.

Do not operate adapter/charger 

 has received a sharp blow.

been dropped, or otherwise damaged in any way. Take it to a
qualified serviceman.

Do 

 disassemble charger. Take it to an Authorized RCA

Compact Camcorder 

 when service or repair is

required., Incorrect reassembly may result in a risk of electric
shock.

To reduce risk of electric shock, unplug charger from outlet
before attempting any maintenance or cleaning.

Be sure to save these operating instructions for future reference.

Summary of Contents for CC180









































Reviews: