RCA BR200DV, Service Manual

Page: 16 / 79

BR200DV/BR300DV
Service Manual
16
3
．
Pry up the aluminum shell by peaking a straight screwdriver in the cross-slot at the
bottom of the aluminum shell, and then pull out the surface shell after placing the
aluminum shell inclined to the back
；
but please be careful not to snap off the cable of the
speaker.
4
．
Screw off the 4
screws M2X3 on the keyboard PCB by a cross screwdriver and take out
the FPC from the socket ,then screw the 5 especially screws M2X3 from main PCB.
5
．
Screw off the 6 screws on the PCB by a cross screwdriver.
6
．
Unsolder the endpoints of the antenna , PTT key board and speaker by an electric iron,
then remove the main board.
After the disassembly above, you can carry out corresponding reparation and debugging
according to the actual malfunction.