4
Installation
Hooking Up To The Antenna Input On Your TV Or VCR
Coaxial Cable Hook-up
1. Locate the “Antenna In” connector on the back of your TV or VCR.
2. Screw the end of the antenna cable to the “Antenna In” connector on the
back of your TV or VCR.
ANTENNA
75/300 ohm Matching Transformer Hook-up
1. Locate the “Antenna In” connector on the back of your TV.
2. Screw the Antenna cable into the 75/300 ohm transformer. Connect the VHF
and UHF antenna leads to the corresponding VHF and UHF screws on the TV.
ANTENNA
75/300 ohm
Matching Transformer
Turning Power On
The Antenna operates on DC power via a 120 VAC wall adapter.
Don't plug the wall adapter into any other power source.
To power your antenna:
1. Connect the power supply to your antenna by plugging the cord
into the jack marked 12VDC, 200mA on the back of the antenna.
2. Plug the wall adapter into a 120 VAC, 60Hz wall outlet.
3. Turn the antenna on by switching the 3 position switch to the AMP
position (located on the back of the antenna).
75/300 ohm Matching Transformer Not Included
ANT1250_IB 7/19/01 9:12 AM Page 4
