1
Register
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to
Register
.
2. Press SELECT soft key.
“Press base unit page button until beep”
shows
in the display.
3. Press and hold the
Page
button on base for 5 seconds.
4.
“Registration”
displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows “
Registration
complete”
for 2 seconds and emits a confirmation tone.
6. If the registration is failed (i.e. timeout), the handset shows
“REGISTRATION FAILED!”
for 2 seconds and emits an error tone.
Remove Handset
De-registration cancels registration. During the de-registration process,
keep the handset near the base.
WARNING: It is not recommended that a handset be
deregistered unless absolutely necessary because once a
handset is deregistered, that handset’s telephone features
cannot be used until the handset is re-registered.
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to the
Remove handset
.
2. Press SELECT soft key. “
Remove handset?”
shows on the display.
3. Press the YES soft key to confirm de-registration. “
Saved”
shows in the
display and then shows
“Press “REG” to initiate registration”
in the
handset.
NOTE: You can press the REG soft key to enter the registation mode again.
De-Register (Only applicable for base)
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to the
Deregistration
.
2. Press SELECT soft key. The list of all registered handsets will be shown,
and use the
VOL
(- or +) button to scroll to your selection.
3. Press the SELECT soft key. “
Remove handset?”
shows on the display.
4. Press YES soft key to confirm de-registration. “
Saved”
shows in the
display and then shows
“Press “REG”
to initiate registration” in the
handset.
Programming the Telephone