43
Unit locks up and no communication between the base and cordless handset
• Unplug the AC power adaptor from the electrical outlet and the back of the base. Remove the
handset battery. Wait for 30 seconds and plug the AC power adaptor back into the base and
electrical outlet. Reconnect the battery and charge for 16 hours.
Charge Indicator on the Base Flashes
• Provided your phone company offers voice messaging service and you subscribe to it, the charge
indicator on the base flashes when the phone is not in use to indicate there is a message waiting.
It’s stops flashing after the message has been reviewed.
Docking Station Solutions
Cannot make or receive cell phone calls through the cordless handset.
• Make sure the docking station is connected to a non-switched electrical outlet. Disconnect the
AC power adaptor from the docking station and reconnect it.
• Make sure the adaptor cable is firmly attached to both the cell phone and the docking station.
Disconnect the adaptor cable from the docking station and the cell phone. Re-attach the
adaptor cable to the docking station, and connect the cell phone to the other end of the adaptor
cable. The docked indicator should come on.
The docked indicator does not illuminate.
• Make sure the docking station is connected to a non-switched electrical outlet. Disconnect the
AC power adaptor from the docking station and reconnect it.
• Make sure the adaptor cable is firmly attached to both the cell phone and the docking station.
The handset does not show caller ID information for cell phone calls.
• Your cell phone may not support caller ID through the adaptor cable.
The handset beeps for call waiting during a cell phone call, but you cannot answer the new call.
• Your cell phone may not support call waiting through the adaptor cable.
The cell phone display shows
SPEAKERPHONE
,
CARKIT
, or other information when connected to the
docking station.
• This is normal. The cell docking system uses these features of your cell phone to enable calling
through the docking station.
NOTE:
The microphone and speaker on the cell phone itself are
disabled when the cell phone is docked.
Troubleshooting
