15
Programming the Handset
Standby Screen
The handset displays the user name (if entered) and handset number.
USER NAME
HANDSET X
Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may program
the following items in main menu: Room Monitor, Handset Setup.
Room Monitor
1. Make sure the cordless handset is
OFF
(not in talk mode).
2. Press the prog/mute button to go to the main menu.
�
ROOM MONITOR
HANDSET SETUP
3. Press the CID/vol
or
buttons to scroll to
ROOM MONITOR
.
4. Press prog/mute button to enter
ROOM MONITOR
menu,
ROOM MONITOR EXTENSION ?
shows in
the display.
5. Use the touch tone pad to enter the handset number to be monitored, either 1, 2, or 3.
6. The receiving handset will turn on the microphone and the originating handset will turn on the
earpiece to monitor sound from the receiving handset.
NOTE:
For room monitoring mode to work, the originating handset must NOT be on the cradle.
NOTE:
While in room monitoring mode, the handsets will emit an alert tone approximately every
5 seconds if there is an incoming call. You may press the home button to quit room monitor and
answer the call.
NOTE:
While in room monitoring mode, the originating handset can be switched to monitor by
speaker mode by pressing the speaker button once. Switch back to earpiece by pressing the home
button once.
NOTE:
Press the flash/exit button on the handset to exit room monitor mode.
Programming the Handset
