7
OPERATION
1. Extend the built-in rod antenna.
2. Press
POWER
to turn on the TV.
3. Press
VHF/UHF
to select VHF or UHF.
The TV starts scanning and stops at the
next active channel in the selected
band. A vertical blue line moves across
the screen when scanning VHF
channels; a vertical green line moves
when scanning UHF channels.
Note:
If the scanning line appears vague
or the tuned channel cannot be locked
when operating in battery power, the
batteries might be weak. Replace them
with new alkaline batteries.
4. Press
CHANNEL <
or
>
to tune to the
desired channel. The scanning line on
the screen aligns with the selected
channel number below the screen and
then disappears when the channel is
received.
To adjust the brightness, press
BRIGHT
–
or
+
. The brightness also changes with
the screen's angle.
To adjust the volume, press
VOLUME –
or
+
.
5. Slowly adjust the antenna direction to
get the best picture.
Notes:
• If desired, fold out the stand on the
back of the TV and lean the TV on a flat
surface at a convenient angle. The stand
can also be used as a handle to carry the
TV.
• If reception is poor, adjust the length or
angle of the rod antenna. If inside a
metal or concrete building, moving
closer to a window might improve
reception.
• Be sure to attach the connecting jacks'
cover on the back securely when
operating the TV in a wet area.
16-3055A.fm Page 7 Wednesday, May 24, 2000 9:01 AM
